lkml.org 
[lkml]   [2013]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v4 12/15] usb: phy: msm: Add support for secondary PHY control
From
Date
Hi, 

On Thu, 2013-12-05 at 10:42 +0000, Mark Rutland wrote:
> On Mon, Nov 18, 2013 at 12:57:42PM +0000, Ivan T. Ivanov wrote:
> >
> > Hi Mark,
> >
> > On Fri, 2013-11-15 at 16:42 +0000, Mark Rutland wrote:
> > > On Tue, Nov 12, 2013 at 02:51:47PM +0000, Ivan T. Ivanov wrote:
> > > > From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
> > > >
> > > > Allow support to use 2nd HSPHY with USB2 Core.
> > > > Some platforms may have configuration to allow USB controller
> > > > work with any of the two HSPHYs present. By default driver
> > > > configures USB core to use primary HSPHY. Add support to allow
> > > > user select 2nd HSPHY using DT parameter.
> > > >
> > > > Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
> > > > Cc: Manu Gautam <mgautam@codeaurora.org>
> > > > Cc: devicetree@vger.kernel.org
> > > > ---
> > > > .../devicetree/bindings/usb/msm-hsusb.txt | 6 +++++
> > > > drivers/usb/phy/phy-msm-usb.c | 24 ++++++++++++++++++--
> > > > include/linux/usb/msm_hsusb.h | 1 +
> > > > include/linux/usb/msm_hsusb_hw.h | 1 +
> > > > 4 files changed, 30 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> > > > index 3f21204..d105ba9 100644
> > > > --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> > > > +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> > > > @@ -72,6 +72,12 @@ Optional properties:
> > > > - qcom,phy-init-sequence: PHY configuration sequence. val, reg pairs
> > > > terminate with -1
> > > >
> > > > +- qcom,phy-num: Select number of pyco-phy to use, can be one of
> > > > + 0 - PHY one, default
> > > > + 1 - Second PHY
> > > > + Some platforms may have configuration to allow USB
> > > > + controller work with any of the two HSPHYs present.
> > > > +
> > >
> > > Only one can be used at a time?
> >
> > Yes only one of them. Selected at driver init time.
>
> Ok. For a given platform, is it likely that both are wired up and
> _possibly_ usable?


My guess is that this is possible :-) Regards. Ivan

>
> Thanks
> Mark.



\
 
 \ /
  Last update: 2013-12-11 10:01    [W:0.699 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site