lkml.org 
[lkml]   [2013]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] regulator: s5m8767: Fix driver probe fail on BUCK7/8 regulators
On Tue, Dec 10, 2013 at 10:09:43AM +0100, Krzysztof Kozlowski wrote:
> The BUCK7 and BUCK8 were not supported by s5m8767 driver. If they were
> configured in DTS then the driver probing would fail with EINVAL:
> [ 0.288474] VCC_SUB_1.35V: failed to apply 1350000uV constraint
> [ 0.288671] s5m8767-pmic s5m8767-pmic: regulator init failed for 35
> [ 0.294931] s5m8767-pmic: probe of s5m8767-pmic failed with error -22

> This patch adds support for BUCK7 and BUCK8 regulators using standard
> regmap get/set voltage sel functions.

I've applied these but this changelog doesn't entirely add up so I
rewrote it a bit. The patch is implementing the get and set voltage
operations, the regulators were actually supported. The errors were
being caused by the DT attempting to set the voltage for a fixed voltage
regulator which obviously won't work - I suspect that the DTs might not
be ideal, it seems common to overspecify voltages in DTs for some
reason.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2013-12-12 00:01    [W:0.087 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site