lkml.org 
[lkml]   [2013]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/1] gpio: add a driver for the Synopsys DesignWare APB GPIO block
From
On Wed, Nov 6, 2013 at 5:44 PM, Sebastian Hesselbarth
<sebastian.hesselbarth@gmail.com> wrote:
>>> +struct dwapb_gpio {
>>> + struct device *dev;
>>> + void __iomem *regs;
>>> + struct dwapb_gpio_port *ports;
>>> + unsigned int nr_ports;
>>> + struct irq_domain *domain;
>>> + int hwirq;
>>
>>
>> I'm not sure I fully understand what hwirq is in this context - is it
>> the IRQ line from the Synopsys block to the system interrupt controller?
>> If so I don't think this covers all configurations - the Picochip
>> devices for instance have each GPIO in port A as an individual IRQ going
>> to the VIC.
>
>
> Usually, hwirq is the interrupt as seen from this very device, i.e. in
> this case it is 0 up to 32 referencing the portA gpio line that
> triggered an interrupt. In this drivers context 'hwirq' above is
> actually the virtual irq number Linux made up to identify an interrupt
> coming from this IP block.
>
> Therefore, above should really be irq instead of hwirq - but with a
> more detailed review, I think it can be removed completely.
>
>> It looks here like hwirq is used for all of the interrupt registers so
>> only one GPIO interrupt is supported?
>
>
> Looking in _probe, currently only one upstream interrupt is requested.
> Jamie is right, that you should grab all interrupts - but you can forget
> their virtual number after registering the handler. There are helper
> functions to get it back in irq handler.
>

The IP configuration I have has only one irq line going to the gic,
(that is the "hwirq" here) so I had one hwirq (the gic) for each IP
instance. The domain maps a Linux IRQ number for each gpio line.

I will need to rework this to also support both this (one irq per IP
block) and the picochip (one irq per gpio line coming out of the IP
block).

>>> +static void __exit dwapb_gpio_exit(void)
>>> +{
>>> + platform_driver_unregister(&dwapb_gpio_driver);
>>> +}
>>> +module_exit(dwapb_gpio_exit);
>>
>>
>> We can replace the registration and unregistration with
>> module_platform_driver() now.
>
>
> +1 (again)

OK

Alan

>
> Sebastian
>


\
 
 \ /
  Last update: 2013-11-07 22:21    [W:0.107 / U:1.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site