Messages in this thread | | | From | Alan Tull <> | Subject | [PATCH 0/1] gpio: add a driver for the Synopsys DesignWare APB GPIO | Date | Wed, 6 Nov 2013 16:49:41 -0600 |
| |
From: Alan Tull <atull@altera.com>
Version 6 - Implementing Sebastian's suggestions.
To make reviewing more to-the-point, I squashed all three commits into one. I hope that expedites things rather than getting in the way, we will see.
I am currently leaving nr-gpios as a required property because I saw a mailing list comment that that register to read the IP configuration is not available on earlier versions of the IP.
s/bank/port/ because the register names use the word 'port'
s/nr-gpio/nr-gpios/
I removed previous acked-by's and sign-off-by's as I felt that it would be weird and sneaky to make lots of changes and keep them, although it feels like a step backwards.
I didn't want to mess with the interrupt enable/mask stuff so I left those as separate.
Alan Tull
Jamie Iles (1): gpio: add a driver for the Synopsys DesignWare APB GPIO block
.../devicetree/bindings/gpio/snps-dwapb-gpio.txt | 57 +++ drivers/gpio/Kconfig | 9 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-dwapb.c | 458 ++++++++++++++++++++ 4 files changed, 525 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt create mode 100644 drivers/gpio/gpio-dwapb.c
-- 1.7.9.5
| |