Messages in this thread |  | | From | "Wendy Ng" <> | Subject | [PATCH V2 0/3] thermal: bcm281xx: Add Temperature Monitor driver | Date | Tue, 5 Nov 2013 11:54:41 -0800 |
| |
This patch series adds the support of the Temperature Monitor driver for Broadcom bcm281xx SoCs. This TMON driver can be used with the Thermal Framework.
This patch series incoporates the feedback from the old series: V1: https://lkml.org/lkml/2013/9/23/424 V2: https://lkml.org/lkml/2013/9/27/555
Note that this patch series is dependent on the following patches: https://lkml.org/lkml/2013/9/26/787 http://www.spinics.net/lists/arm-kernel/msg274963.html https://lkml.org/lkml/2013/10/3/645
--- Delta from V1 of this patch series: 1. Update bcm-kona-thermal.txt to remove the 'status' property 2. Added the references to the generic thermal sensor binding and the generic clock consumer binding in bcm-kona-thermal.txt.
Wendy Ng (3): thermal: bcm281xx: Add Temperature Monitor driver ARM: configs:enable thermal framework for bcm281xx ARM: dts: Add TMON driver support to bcm281xx
.../bindings/thermal/bcm-kona-thermal.txt | 27 +++ arch/arm/boot/dts/bcm11351-brt.dts | 4 + arch/arm/boot/dts/bcm11351.dtsi | 29 ++++ arch/arm/boot/dts/bcm28155-ap.dts | 4 + arch/arm/configs/bcm_defconfig | 4 +- drivers/thermal/Kconfig | 11 ++ drivers/thermal/Makefile | 1 + drivers/thermal/bcm_kona_tmon.c | 173 ++++++++++++++++++++ 8 files changed, 252 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt create mode 100644 drivers/thermal/bcm_kona_tmon.c
-- 1.7.9.5
|  |