lkml.org 
[lkml]   [2013]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 2/3 v3] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
Date


>
> usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
>
> * init the sts flag to 0 (missed)
> * Set PORTCS_STS only if VUSB_HS_PHY_TYPE > 1
> otherwise the register is ReadOnly
> * Set/Reset correct BIT(28)/BIT(29) for STS
>
> Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
> ---
> drivers/usb/chipidea/core.c | 20 +++++++++++++++++---
> 1 file changed, 17 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index 5075407..2c634c1 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -243,7 +243,7 @@ static int hw_device_init(struct ci_hdrc *ci, void
> __iomem *base)
>
> static void hw_phymode_configure(struct ci_hdrc *ci)
> {
> - u32 portsc, lpm, sts;
> + u32 portsc, lpm, sts = 0;
>
> switch (ci->platdata->phy_mode) {
> case USBPHY_INTERFACE_MODE_UTMI:
> @@ -273,10 +273,24 @@ static void hw_phymode_configure(struct ci_hdrc *ci)
>
> if (ci->hw_bank.lpm) {
> hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
> - hw_write(ci, OP_DEVLC, DEVLC_STS, sts);
> + if ( sts )
> + hw_write(ci, OP_DEVLC, DEVLC_STS, BIT(28));
> + else
> + hw_write(ci, OP_DEVLC, DEVLC_STS, ~BIT(28));
> } else {
> hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
> - hw_write(ci, OP_PORTSC, PORTSC_STS, sts);
> + if (((portsc >> 30) & 0x3) > 1) {
> + if (sts) {
> + hw_write(ci, OP_PORTSC, PORTSC_STS, BIT(29));
> + }
> + else {
> + portsc = (ioread32(ci->hw_bank.regmap[OP_PORTSC])
> + & PORTSC_STS);
> + if (portsc)
> + hw_write(ci, OP_PORTSC, PORTSC_STS,
> + ~BIT(29));
> + }
> + }
> }
> }
>
> --

At my chipidea datasheet, the VUSB_HS_PHY_SERIAL is at HWGENERAL (bit[10..11]),
We are still not sure the portsc_sts is needed to set or clear, and how to do
it. My suggestion is just use v2 patch (except fixing one code style problem)

Peter




\
 
 \ /
  Last update: 2013-11-30 11:41    [W:0.115 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site