Messages in this thread | | | Date | Wed, 27 Nov 2013 12:19:52 -0500 | From | Matt Porter <> | Subject | Re: [PATCH v3 7/9] phy: add Broadcom Kona USB2 PHY DT binding |
| |
On Tue, Nov 26, 2013 at 04:01:05PM +0530, Kishon Vijay Abraham I wrote: > Hi, > > On Monday 25 November 2013 11:46 PM, Matt Porter wrote: > > Add a binding that describes the Broadcom Kona USB2 PHY found > > on the BCM281xx family of SoCs. > > > > Signed-off-by: Matt Porter <matt.porter@linaro.org> > > --- > > .../devicetree/bindings/phy/bcm-kona-usb2-phy.txt | 15 +++++++++++++++ > > 1 file changed, 15 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt > > > > diff --git a/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt > > new file mode 100644 > > index 0000000..3dc8b3d > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt > > you should name this bcm-phy. Then you can add binding info of all (future) PHY > IP from broadcom here. > > other than that this looks fine..
Ok, sounds reasonable. I've noticed that convention with the TI USB bindings...I'll do the same.
> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> > > Thanks > Kishon
| |