Messages in this thread Patch in this message | | | From | Matt Porter <> | Subject | [PATCH v3 7/9] phy: add Broadcom Kona USB2 PHY DT binding | Date | Mon, 25 Nov 2013 13:16:05 -0500 |
| |
Add a binding that describes the Broadcom Kona USB2 PHY found on the BCM281xx family of SoCs.
Signed-off-by: Matt Porter <matt.porter@linaro.org> --- .../devicetree/bindings/phy/bcm-kona-usb2-phy.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt new file mode 100644 index 0000000..3dc8b3d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt @@ -0,0 +1,15 @@ +BROADCOM KONA USB2 PHY + +Required properties: + - compatible: brcm,kona-usb2-phy + - reg: offset and length of the PHY registers + - #phy-cells: must be 0 +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Example: + + usbphy: usb-phy@3f130000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x3f130000 0x28>; + #phy-cells = <0>; + }; -- 1.8.4
| |