lkml.org 
[lkml]   [2013]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 01/10] usb: dwc3: invoke phy_resume after phy_init
Date
usb_phy_set_suspend(phy, 0) is called before usb_phy_init. Fix it.

Reported-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/usb/dwc3/core.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 74f9cf0..4dd1f7e 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -455,9 +455,6 @@ static int dwc3_probe(struct platform_device *pdev)
if (IS_ERR(regs))
return PTR_ERR(regs);

- usb_phy_set_suspend(dwc->usb2_phy, 0);
- usb_phy_set_suspend(dwc->usb3_phy, 0);
-
spin_lock_init(&dwc->lock);
platform_set_drvdata(pdev, dwc);

@@ -488,6 +485,9 @@ static int dwc3_probe(struct platform_device *pdev)
goto err0;
}

+ usb_phy_set_suspend(dwc->usb2_phy, 0);
+ usb_phy_set_suspend(dwc->usb3_phy, 0);
+
ret = dwc3_event_buffers_setup(dwc);
if (ret) {
dev_err(dwc->dev, "failed to setup event buffers\n");
--
1.7.10.4


\
 
 \ /
  Last update: 2013-11-25 11:41    [W:0.294 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site