lkml.org 
[lkml]   [2013]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 06/10] Documentation: dt bindings: move ..usb/usb-phy.txt to ..phy/ti-phy.txt
Date
Since now we have a separate folder for phy, move the PHY dt binding
documentation of TI to that folder.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../devicetree/bindings/{usb/usb-phy.txt => phy/ti-phy.txt} | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
rename Documentation/devicetree/bindings/{usb/usb-phy.txt => phy/ti-phy.txt} (88%)

diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
similarity index 88%
rename from Documentation/devicetree/bindings/usb/usb-phy.txt
rename to Documentation/devicetree/bindings/phy/ti-phy.txt
index c0245c8..207e14c 100644
--- a/Documentation/devicetree/bindings/usb/usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -1,4 +1,4 @@
-USB PHY
+TI PHY: DT DOCUMENTATION FOR PHYs in TI PLATFORMs

OMAP USB2 PHY

@@ -21,10 +21,10 @@ usb2phy@4a0ad080 {
#phy-cells = <0>;
};

-OMAP USB3 PHY
+TI PIPE3 PHY

Required properties:
- - compatible: Should be "ti,omap-usb3"
+ - compatible: Should be "ti,phy-usb3". "ti,omap-usb3" is deprecated.
- reg : Address and length of the register set for the device.
- reg-names: The names of the register addresses corresponding to the registers
filled in "reg".
@@ -38,7 +38,7 @@ Optional properties:
This is usually a subnode of ocp2scp to which it is connected.

usb3phy@4a084400 {
- compatible = "ti,omap-usb3";
+ compatible = "ti,phy-usb3";
reg = <0x4a084400 0x80>,
<0x4a084800 0x64>,
<0x4a084c00 0x40>;
--
1.7.10.4


\
 
 \ /
  Last update: 2013-11-25 11:21    [W:0.247 / U:2.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site