lkml.org 
[lkml]   [2013]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/9] backlight: atmel-pwm-bl: fix reported brightness
On Fri, Oct 25, 2013 at 01:08:36PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 11:55 Wed 23 Oct , Johan Hovold wrote:
> > The driver supports 16-bit brightness values, but the value returned
> > from get_brightness was truncated to eight bits.
> >
> > Cc: stable@vger.kernel.org
> > Acked-by: Jingoo Han <jg1.han@samsung.com>
> > Signed-off-by: Johan Hovold <jhovold@gmail.com>
> > ---
> > drivers/video/backlight/atmel-pwm-bl.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/video/backlight/atmel-pwm-bl.c b/drivers/video/backlight/atmel-pwm-bl.c
> > index 66885fb..8aac273 100644
> > --- a/drivers/video/backlight/atmel-pwm-bl.c
> > +++ b/drivers/video/backlight/atmel-pwm-bl.c
> > @@ -70,7 +70,7 @@ static int atmel_pwm_bl_set_intensity(struct backlight_device *bd)
> > static int atmel_pwm_bl_get_intensity(struct backlight_device *bd)
> > {
> > struct atmel_pwm_bl *pwmbl = bl_get_data(bd);
> > - u8 intensity;
> > + u32 intensity;
> >
> > if (pwmbl->pdata->pwm_active_low) {
> > intensity = pwm_channel_readl(&pwmbl->pwmc, PWM_CDTY) -
> > @@ -80,7 +80,7 @@ static int atmel_pwm_bl_get_intensity(struct backlight_device *bd)
> > pwm_channel_readl(&pwmbl->pwmc, PWM_CDTY);
> > }
> >
> > - return intensity;
> > + return (u16)intensity;
> no cast mask it

Yeah, perhaps that is better. I discussed this a bit with Jingoo Han in
the thread of the original post. I'll respin.

Thanks,
Johan

> > }
> >
> > static int atmel_pwm_bl_init_pwm(struct atmel_pwm_bl *pwmbl)
> > --
> > 1.8.4
> >


\
 
 \ /
  Last update: 2013-10-29 15:21    [W:0.169 / U:1.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site