Messages in this thread |  | | Date | Tue, 8 Jan 2013 14:38:51 +0300 | From | Dan Carpenter <> | Subject | Re: add Packet hub driver for Topcliff Platform controller hub |
| |
On Tue, Jan 08, 2013 at 07:30:34PM +0900, Tomoya MORINAGA wrote: > Hi Dan, > > On Mon, Jan 7, 2013 at 6:02 PM, Dan Carpenter <dan.carpenter@oracle.com> wrote: > > The patch cf4ece53460c: "add Packet hub driver for Topcliff Platform > > controller hub" from Sep 1, 2010, leads to the following warning: > > drivers/misc/pch_phub.c:596 pch_phub_bin_write() > > error: buffer overflow 'buf' 4096 <= 15359 > > > > Sorry my question is about an old patch. Smatch complains because we > > only pass a PAGE_SIZE buffer to sysfs files so the test for > > "if (count > PCH_PHUB_OROM_SIZE) {" makes it think we are overflowing. > > In fact, count is never more than 4096 so there is no overflow, but I > > also think that it means only the first 4096 bytes of the firmware gets > > updated. > > > > drivers/misc/pch_phub.c > > 560 static ssize_t pch_phub_bin_write(struct file *filp, struct kobject *kobj, > > 561 struct bin_attribute *attr, > > 562 char *buf, loff_t off, size_t count) > > 563 { > > 564 int err; > > 565 unsigned int addr_offset; > > 566 int ret; > > 567 ssize_t rom_size; > > 568 struct pch_phub_reg *chip = > > 569 dev_get_drvdata(container_of(kobj, struct device, kobj)); > > 570 > > 571 ret = mutex_lock_interruptible(&pch_phub_mutex); > > 572 if (ret) > > 573 return -ERESTARTSYS; > > 574 > > 575 if (off > PCH_PHUB_OROM_SIZE) { > > 576 addr_offset = 0; > > 577 goto return_ok; > > 578 } > > 579 if (count > PCH_PHUB_OROM_SIZE) { > > ^^^^^^^^^^^^^^^^^^ > > This is 15359. > > > > 580 addr_offset = 0; > > 581 goto return_ok; > > 582 } > > 583 > > 584 chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size); > > 585 if (!chip->pch_phub_extrom_base_address) { > > 586 err = -ENOMEM; > > 587 goto exrom_map_err; > > 588 } > > 589 > > 590 for (addr_offset = 0; addr_offset < count; addr_offset++) { > > 591 if (PCH_PHUB_OROM_SIZE < off + addr_offset) > > 592 goto return_ok; > > 593 > > 594 ret = pch_phub_write_serial_rom(chip, > > 595 chip->pch_opt_rom_start_address + addr_offset + off, > > 596 buf[addr_offset]); > > ^^^^^^^^^^^^^^^^ > > Smatch complains because "buf" is only 4096 bytes. > > > > I can understand your saying. > > You mean just delete the following condition ? > > 579 if (count > PCH_PHUB_OROM_SIZE) { >
What I'm saying is that sysfs files can only be 4096 bytes (larger on some arches with a larger PAGE_SIZE) and your firmware is larger than that. It won't work.
regards, dan carpenter
> Thanks. > > -- > ROHM Co., Ltd. > tomoya
|  |