lkml.org 
[lkml]   [2013]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: One of these things (CONFIG_HZ) is not like the others..
On 01/27/2013 10:08 PM, Santosh Shilimkar wrote:
> On Tuesday 22 January 2013 08:35 PM, Santosh Shilimkar wrote:
>> On Tuesday 22 January 2013 08:21 PM, Russell King - ARM Linux wrote:
>>> On Tue, Jan 22, 2013 at 03:44:03PM +0530, Santosh Shilimkar wrote:
>>>> Sorry for not being clear enough. On OMAP, 32KHz is the only clock
>>>> which
>>>> is always running(even during low power states) and hence the clock
>>>> source and clock event have been clocked using 32KHz clock. As
>>>> mentioned
>>>> by RMK, with 32768 Hz clock and HZ = 100, there will be always an
>>>> error of 0.1 %. This accuracy also impacts the timer tick interval.
>>>> This was the reason, OMAP has been using the HZ = 128.
>>>
>>> Ok. Let's look at this. As far as time-of-day is concerned, this
>>> shouldn't really matter with the clocksource/clockevent based system
>>> that we now have (where *important point* platforms have been converted
>>> over.)
>>>
>>> Any platform providing a clocksource will override the jiffy-based
>>> clocksource. The measurement of time-of-day passing is now based on
>>> the difference in values read from the clocksource, not from the actual
>>> tick rate.
>>>
>>> Anything _not_ providing a clock source will be reliant on jiffies
>>> incrementing, which in turn _requires_ one timer interrupt per jiffies
>>> at a known rate (which is HZ).
>>>
>>> Now, that's the time of day, what about jiffies? Well, jiffies is
>>> incremented based on a certain number of nsec having passed since the
>>> last jiffy update. That means the code copes with dropped ticks and
>>> the like.
>>>
>>> However, if your actual interrupt rate is close to the desired HZ, then
>>> it can lead to some interesting effects (and noise):
>>>
>>> - if the interrupt rate is slightly faster than HZ, then you can end up
>>> with updates being delayed by 2x interrupt rate.
>>> - if the interrupt rate is slightly slower than HZ, you can
>>> occasionally
>>> end up with jiffies incrementing by two.
>>> - if your interrupt rate is dead on HZ, then other system noise can
>>> come
>>> into effect and you may get maybe zero, one or two jiffy increments
>>> per
>>> interrupt.
>>>
>>> (You have to think about time passing in NS, where jiffy updates should
>>> be vs where the timer interrupts happen.) See
>>> tick_do_update_jiffies64()
>>> for the details.
>>>
>>> The timer infrastructure is jiffy based - which includes scheduling
>>> where
>>> the scheduler does not use hrtimers. That means a slight discrepency
>>> between HZ and the actual interrupt rate can cause around 1/HZ jitter.
>>> That's a matter of fact due to how the code works.
>>>
>>> So, actually, I think the accuracy of HZ has much overall effect
>>> _provided_
>>> a platform provides a clocksource to the accuracy of jiffy based timers
>>> nor timekeeping. For those which don't, the accuracy of the timer
>>> interrupt to HZ is very important.
>>>
>>> (This is just based on reading some code and not on practical
>>> experiments - I'd suggest some research of this is done, trying HZ=100
>>> on OMAP's 32kHz timers, checking whether there's any drift, checking
>>> how accurately a single task can be woken from various
>>> select/poll/epoll
>>> delays, and checking whether NTP works.)
>>>
>> Thanks for expanding it. It is really helpful.
>>
>>> And I think further discussion is pointless until such research has
>>> been
>>> done (or someone who _really_ knows the time keeping/timer/sched code
>>> inside out comments.)
>>>
>> Fully agree about experimentation to re-asses the drift.
>> From what I recollect from past, few OMAP customers did
>> report the time drift issue and that is how the switch
>> from 100 --> 128 happened.
>>
>> Anyway I have added the suggested task to my long todo list.
>>
> So I tried to see if any time drift with HZ = 100 on OMAP. I ran the
> setup for 62 hours and 27 mins with time synced up once with NTP server.
> I measure about ~174 millisecond drift which is almost noise considering
> the observed duration was ~224820000 milliseconds.

So 174ms drift doesn't sound great, as < 2ms (often much less - though
that depends on how close the server is) can be expected with NTP.
Although its not clear how you were measuring: Did you see a max 174ms
offset while trying to sync with NTP? Was that offset shortly after
starting NTP or after NTP converged down?

thanks
-john



\
 
 \ /
  Last update: 2013-01-29 01:41    [W:0.117 / U:0.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site