lkml.org 
[lkml]   [2013]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] libertas sdio: remove CMD_FUNC_INIT call
Date
It actually times out on a 8688 present in GuruPlug with sd8688.bin
(md5=7233401e9687f8c880da547beed4324e) firmware (that's present in
linux-firmware tree), but the adapter works fine.

For that firmware times out with libertas_uap [1] as well, though it succeeds
with sd8688_ap.bin (md5=52cd8f8296b9a7e1d3835d57416256b2) that was originally
shipped with GuruPlug. That firmware is not in linux-firmware tree and btmrvl
driver might win the race programming the 8688 with sd8688.bin anyway.

[1] https://github.com/lkundrak/linux/tree/libertas_uap
---
drivers/net/wireless/libertas/if_sdio.c | 14 --------------
1 files changed, 0 insertions(+), 14 deletions(-)

diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 2ecab49..3c4c555 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -825,20 +825,6 @@ static void if_sdio_finish_power_on(struct if_sdio_card *card)

sdio_release_host(func);

- /*
- * FUNC_INIT is required for SD8688 WLAN/BT multiple functions
- */
- if (card->model == MODEL_8688) {
- struct cmd_header cmd;
-
- memset(&cmd, 0, sizeof(cmd));
-
- lbs_deb_sdio("send function INIT command\n");
- if (__lbs_cmd(priv, CMD_FUNC_INIT, &cmd, sizeof(cmd),
- lbs_cmd_copyback, (unsigned long) &cmd))
- netdev_alert(priv->dev, "CMD_FUNC_INIT cmd failed\n");
- }
-
priv->fw_ready = 1;
wake_up(&card->pwron_waitq);

--
1.7.1


\
 
 \ /
  Last update: 2013-01-18 09:01    [W:0.114 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site