lkml.org 
[lkml]   [2013]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] i2c-designware: add Intel Lynxpoint support
Date
Hi all,

This series adds support for the Intel Lynxpoint Low Power Subsystem I2C
controllers. They are compatible with the DesignWare I2C controller.

Patches [1/4] and [2/4] are fixes that are necessary to get the driver
working on Lynxpoint.

Patch [3/4] brings minimal runtime PM support for the designware platform
driver. This is useful if the PM subsystem/domain implements runtime PM,
like in case of ACPI.

Patch [4/4] finally implements ACPI enumeration support for the designware
platform driver and adds Lynxpoint ACPI IDs.

Please review.

Mika Westerberg (4):
i2c-designware: add missing MODULE_LICENSE
i2c-designware: always set the STOP bit after last byte
i2c-designware: add minimal support for runtime PM
i2c-designware: add support for Intel Lynxpoint

drivers/i2c/busses/i2c-designware-core.c | 20 ++++++++-
drivers/i2c/busses/i2c-designware-platdrv.c | 59 +++++++++++++++++++++++++--
2 files changed, 74 insertions(+), 5 deletions(-)

--
1.7.10.4



\
 
 \ /
  Last update: 2013-01-17 12:21    [W:0.157 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site