lkml.org 
[lkml]   [2013]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 3/3] net: stmmac: add gmac autonego set for ethtool support
Date

This patch adds gmac auto-negotiation setting for ethtool.
If interface is SGMII, TBI or RTBI, gmac's auto-negotiation
enable bit is need to set.

Signed-off-by: Byungho An <bh74.an@samsung.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index 1372ce2..457c1a4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -335,6 +335,7 @@ stmmac_set_pauseparam(struct net_device *netdev,
struct phy_device *phy = priv->phydev;
int new_pause = FLOW_OFF;
int ret = 0;
+ int interface = priv->plat->interface;

spin_lock(&priv->lock);

@@ -348,6 +349,10 @@ stmmac_set_pauseparam(struct net_device *netdev,

if (phy->autoneg) {
if (netif_running(netdev))
+ if (interface == PHY_INTERFACE_MODE_SGMII ||
+ interface == PHY_INTERFACE_MODE_TBI ||
+ interface == PHY_INTERFACE_MODE_RTBI)
+ priv->hw->mac->set_autoneg(priv->ioaddr);
ret = phy_start_aneg(phy);
} else
priv->hw->mac->flow_ctrl(priv->ioaddr, phy->duplex,
--
1.7.10.4



\
 
 \ /
  Last update: 2013-01-15 23:21    [W:0.089 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site