lkml.org 
[lkml]   [2012]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/5] regulator: lp872x: initialize the DVS mode
Date

The platform specific configuration(general_config) is optional.
However, the DVS settings should be configured explicitly while
loading the driver.
This patch enables configuring the default DVS mode even though
the platform data is not defined.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
---
drivers/regulator/lp872x.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c
index d86b6a3..b16a941 100644
--- a/drivers/regulator/lp872x.c
+++ b/drivers/regulator/lp872x.c
@@ -796,13 +796,14 @@ static int lp872x_config(struct lp872x *lp)
struct lp872x_platform_data *pdata = lp->pdata;
int ret;

- if (!pdata->update_config)
- return 0;
+ if (!pdata || !pdata->update_config)
+ goto init_dvs;

ret = lp872x_write_byte(lp, LP872X_GENERAL_CFG, pdata->general_config);
if (ret)
return ret;

+init_dvs:
return lp872x_init_dvs(lp);
}

--
1.7.9.5

Best Regards,
Milo




\
 
 \ /
  Last update: 2012-09-05 07:23    [W:0.026 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site