Messages in this thread | | | Subject | PROBLEM: Kernel 3.6.0-rc7 freezes up | From | Raj Upadhyaya <> | Date | Fri, 28 Sep 2012 02:43:37 -0500 |
| |
[1.] PROBLEM: Kernel 3.6.0-rc7 freezes up [2.] I downloaded the kernel from kernel.org and built 3.6.0-rc7. It freezes up early in the boot. I am able to see that the keyboard is active as Num Lock, Caps Lock and Ctrl-Alt-Delete still work. [3.] kernel [4.] 3.6.0-rc7 [5.] [6.] N/A [7.] Environment [7.1.] Software (add the output of the ver_linux script here) [7.2.] Processor information (from /proc/cpuinfo): I rebooted and chose 3.6.0-rc6 and the following info is produced. processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Pentium(R) D CPU 2.80GHz stepping : 4 microcode : 0x4 cpu MHz : 2400.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pebs bts pni dtes64 monitor ds_cpl est cid cx16 xtpr pdcm lahf_lm bogomips : 5601.50 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 48 bits virtual power management:
processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Pentium(R) D CPU 2.80GHz stepping : 4 microcode : 0x4 cpu MHz : 2400.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pebs bts pni dtes64 monitor ds_cpl est cid cx16 xtpr pdcm lahf_lm bogomips : 5601.50 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 48 bits virtual power management: [7.3.] Module information (from /proc/modules): I rebooted and chose 3.6.0-rc6 and the following info is produced. tcp_lp 12583 0 - Live 0xf88f7000 des_generic 21135 0 - Live 0xf853d000 md4 12523 0 - Live 0xf8533000 nls_utf8 12493 1 - Live 0xf8522000 cifs 276322 2 - Live 0xf87fd000 fscache 48610 1 cifs, Live 0xf855e000 fuse 71577 3 - Live 0xf854b000 bnep 18863 2 - Live 0xf8511000 nf_conntrack_netbios_ns 12585 0 - Live 0xf851a000 nf_conntrack_broadcast 12487 1 nf_conntrack_netbios_ns, Live 0xf8502000 ip6t_REJECT 12826 2 - Live 0xf84fd000 bluetooth 275600 7 bnep, Live 0xf87b8000 nf_conntrack_ipv6 14077 13 - Live 0xf84e4000 nf_defrag_ipv6 13708 1 nf_conntrack_ipv6, Live 0xf84ef000 nf_conntrack_ipv4 14457 12 - Live 0xf84df000 nf_defrag_ipv4 12601 1 nf_conntrack_ipv4, Live 0xf84ea000 xt_state 12514 25 - Live 0xf84da000 rfkill 20451 3 bluetooth, Live 0xf8545000 nf_conntrack 72002 5 nf_conntrack_netbios_ns,nf_conntrack_broadcast,nf_conntrack_ipv6,nf_conntrack_ipv4,xt_state, Live 0xf84c7000 ip6table_filter 12711 1 - Live 0xf84f8000 ip6_tables 17744 1 ip6table_filter, Live 0xf8432000 binfmt_misc 17231 1 - Live 0xf88ac000 snd_hda_codec_realtek 63450 1 - Live 0xf84b0000 snd_hda_intel 32538 4 - Live 0xf8508000 snd_hda_codec 109373 2 snd_hda_codec_realtek,snd_hda_intel, Live 0xf8494000 snd_hwdep 13232 1 snd_hda_codec, Live 0xf8424000 snd_seq 54674 0 - Live 0xf8485000 snd_seq_device 13824 1 snd_seq, Live 0xf8341000 snd_pcm 81440 3 snd_hda_intel,snd_hda_codec, Live 0xf840f000 snd_page_alloc 13709 2 snd_hda_intel,snd_pcm, Live 0xf8407000 snd_timer 23742 2 snd_seq,snd_pcm, Live 0xf8371000 joydev 17161 0 - Live 0xf8401000 e100 35903 0 - Live 0xf8367000 iTCO_wdt 13256 0 - Live 0xf81bb000 iTCO_vendor_support 13243 1 iTCO_wdt, Live 0xf837b000 ppdev 17363 0 - Live 0xf8361000 mii 13311 1 e100, Live 0xf8480000 snd 63133 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer, Live 0xf8350000 serio_raw 13159 0 - Live 0xf8346000 pcspkr 12630 0 - Live 0xf834b000 parport_pc 27403 0 - Live 0xf82f5000 parport 39143 2 ppdev,parport_pc, Live 0xf856e000 lpc_ich 16925 0 - Live 0xf81f6000 soundcore 14123 1 snd, Live 0xf842d000 microcode 18724 0 - Live 0xf81f0000 i2c_i801 17782 0 - Live 0xf81b5000 uinput 17304 0 - Live 0xf89de000 firewire_ohci 35521 0 - Live 0xf81a6000 firewire_core 55924 1 firewire_ohci, Live 0xf81e1000 usb_storage 46945 0 - Live 0xf8199000 crc_itu_t 12523 1 firewire_core, Live 0xf81b0000 i915 470817 3 - Live 0xf8281000 video 18504 1 i915, Live 0xf8181000 i2c_algo_bit 13065 1 i915, Live 0xf7c79000 drm_kms_helper 30925 1 i915, Live 0xf8190000 drm 211791 4 i915,drm_kms_helper, Live 0xf7c37000 i2c_core 28418 5 i2c_i801,i915,i2c_algo_bit,drm_kms_helper,drm, Live 0xf7c71000 [7.4.] Loaded driver and hardware information (/proc/ioports, 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-0060 : keyboard 0064-0064 : keyboard 0070-0073 : rtc0 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : 0000:00:1f.1 0170-0177 : ata_piix 01f0-01f7 : 0000:00:1f.1 01f0-01f7 : ata_piix 0376-0376 : 0000:00:1f.1 0376-0376 : ata_piix 0378-037a : parport0 03c0-03df : vesafb 03f6-03f6 : 0000:00:1f.1 03f6-03f6 : ata_piix 0400-04bf : pnp 00:07 0400-0403 : ACPI PM1a_EVT_BLK 0404-0405 : ACPI PM1a_CNT_BLK 0408-040b : ACPI PM_TMR 0428-042f : ACPI GPE0_BLK 0430-0433 : iTCO_wdt 0430-0433 : iTCO_wdt 0460-047f : iTCO_wdt 0460-047f : iTCO_wdt 04d0-04d1 : pnp 00:01 0500-051f : 0000:00:1f.3 0500-051f : i801_smbus 0800-087f : pnp 00:01 0880-088f : pnp 00:01 0cf8-0cff : PCI conf1 e000-efff : PCI Bus 0000:01 ec00-ecff : 0000:01:05.0 ee00-ee3f : 0000:01:08.0 ee00-ee3f : e100 ef00-ef7f : 0000:01:01.0 f500-f50f : 0000:00:1f.2 f500-f50f : ahci f600-f603 : 0000:00:1f.2 f600-f603 : ahci f700-f707 : 0000:00:1f.2 f700-f707 : ahci f800-f803 : 0000:00:1f.2 f800-f803 : ahci f900-f907 : 0000:00:1f.2 f900-f907 : ahci fa00-fa0f : 0000:00:1f.1 fa00-fa0f : ata_piix fb00-fb1f : 0000:00:1d.3 fb00-fb1f : uhci_hcd fc00-fc1f : 0000:00:1d.2 fc00-fc1f : uhci_hcd fd00-fd1f : 0000:00:1d.1 fd00-fd1f : uhci_hcd fe00-fe1f : 0000:00:1d.0 fe00-fe1f : uhci_hcd ff00-ff07 : 0000:00:02.0
/proc/iomem) I rebooted and chose 3.6.0-rc6 and the following info is produced. 00000000-0000ffff : reserved 00010000-000987ff : System RAM 00098800-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000cc000-000d07ff : Adapter ROM 000d0800-000d3fff : pnp 00:0a 000e0000-000effff : pnp 00:0a 000f0000-000fffff : reserved 000f0000-000fffff : System ROM 00100000-7f6dffff : System RAM 00400000-0094f12c : Kernel code 0094f12d-00bf413f : Kernel data 00c97000-00d8bfff : Kernel bss 7f6e0000-7f6e2fff : ACPI Non-volatile Storage 7f6e3000-7f6effff : ACPI Tables 7f6f0000-7f6fffff : reserved 7f700000-7fffffff : RAM buffer e0000000-efffffff : 0000:00:02.0 f0000000-f3ffffff : PCI MMCONFIG 0000 [bus 00-3f] f0000000-f3ffffff : reserved f0000000-f3ffffff : pnp 00:09 fde00000-fdefffff : PCI Bus 0000:01 fdefe000-fdefefff : 0000:01:08.0 fdefe000-fdefefff : e100 fdeff000-fdeff7ff : 0000:01:01.0 fdeff000-fdeff7ff : firewire_ohci fdf00000-fdf7ffff : 0000:00:02.0 fdf80000-fdfbffff : 0000:00:02.0 fdff8000-fdffbfff : 0000:00:1b.0 fdff8000-fdffbfff : ICH HD audio fdffe000-fdffe3ff : 0000:00:1f.2 fdffe000-fdffe3ff : ahci fdfff000-fdfff3ff : 0000:00:1d.7 fdfff000-fdfff3ff : ehci_hcd fec00000-ffffffff : reserved fec00000-fec003ff : IOAPIC 0 fed1f410-fed1f414 : iTCO_wdt fed1f410-fed1f414 : iTCO_wdt fee00000-fee00fff : Local APIC fee00000-fee00fff : pnp 00:0a ffb00000-ffb7ffff : pnp 00:0a fff00000-ffffffff : pnp 00:0a
[7.5.] PCI information ('lspci -vvv' as root) I rebooted and chose 3.6.0-rc6 and the following info is produced. 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) Subsystem: Hewlett-Packard Company Pavilion A1512X Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=09 <?> Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Pavilion A1512X Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fdf00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at ff00 [size=8] Region 2: Memory at e0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at fdf80000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: i915
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) Subsystem: Hewlett-Packard Company Pavilion A1512X Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 41 Region 0: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 41a1 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80 Status: NegoPending- InProgress- Capabilities: [130 v1] Root Complex Link Desc: PortNumber=0f ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: snd_hda_intel
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Pavilion A1512X Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at fe00 [size=32] Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Pavilion A1512X Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at fd00 [size=32] Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Pavilion A1512X Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at fc00 [size=32] Kernel driver in use: uhci_hcd
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Pavilion A1512X Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at fb00 [size=32] Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Pavilion A1512X Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Hewlett-Packard Company Pavilion A1512X
00:1f.0 ISA bridge: Intel Corporation 82801GH (ICH7DH) LPC Interface Bridge (rev 01) Subsystem: Hewlett-Packard Company Pavilion A1512X Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel driver in use: lpc_ich
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company Pavilion A1512X Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at fa00 [size=16] Kernel driver in use: ata_piix
00:1f.2 RAID bus controller: Intel Corporation 82801GR/GH (ICH7 Family) SATA RAID Controller (rev 01) Subsystem: Hewlett-Packard Company Device 2a3b Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 40 Region 0: I/O ports at f900 [size=8] Region 1: I/O ports at f800 [size=4] Region 2: I/O ports at f700 [size=8] Region 3: I/O ports at f600 [size=4] Region 4: I/O ports at f500 [size=16] Region 5: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4181 Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) Subsystem: Hewlett-Packard Company Pavilion A1512X Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 0500 [size=32] Kernel driver in use: i801_smbus
01:01.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device 2a3b Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (8000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at ef00 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: firewire_ohci
01:05.0 Communication controller: Agere Systems Lucent V.92 Data/Fax Modem Subsystem: Agere Systems Lucent V.92 Data/Fax Modem Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 255 Region 0: I/O ports at ec00 [size=256] Capabilities: [f8] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
01:08.0 Ethernet controller: Intel Corporation N10/ICH 7 Family LAN Controller (rev 01) Subsystem: Hewlett-Packard Company Pavilion A1512X Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at fdefe000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at ee00 [size=64] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- Kernel driver in use: e100 [7.6.] SCSI information (from /proc/scsi/scsi) I rebooted and chose 3.6.0-rc6 and the following info is produced. Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: WDC WD3000JS-60P Rev: 21.0 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi4 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: DVDRRW GSA-H20L Rev: S632 Type: CD-ROM ANSI SCSI revision: 05 Host: scsi6 Channel: 00 Id: 00 Lun: 00 Vendor: Generic Model: USB SD Reader Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00 Host: scsi6 Channel: 00 Id: 00 Lun: 01 Vendor: Generic Model: USB CF Reader Rev: 1.01 Type: Direct-Access ANSI SCSI revision: 00 Host: scsi6 Channel: 00 Id: 00 Lun: 02 Vendor: Generic Model: USB SM Reader Rev: 1.02 Type: Direct-Access ANSI SCSI revision: 00 Host: scsi6 Channel: 00 Id: 00 Lun: 03 Vendor: Generic Model: USB MS Reader Rev: 1.03 Type: Direct-Access ANSI SCSI revision: 00 [7.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant): [X.] Other notes, patches, fixes, workarounds: I tried rebuilding the kernel without bluetooth and Wimax support, with the same results.
| |