Messages in this thread Patch in this message | | | From | Linus Walleij <> | Subject | [PATCH] pinctrl/nomadik: allocate IRQ descriptors dynamically | Date | Wed, 26 Sep 2012 19:18:07 +0200 |
| |
From: Linus Walleij <linus.walleij@linaro.org>
This allocates the IRQ descriptors for the Nomadik pin controller dynamically so that we don't have to rely on some other mechanism doing it, and moving a step closer to a linear IRQ domain.
Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/pinctrl/pinctrl-nomadik.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index 3dde653..29921d1 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -1185,6 +1185,8 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) struct clk *clk; int secondary_irq; void __iomem *base; + int irq_start; + int irq_base; int irq; int ret; @@ -1288,9 +1290,22 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) platform_set_drvdata(dev, nmk_chip); + /* + * Allocate descriptors and IRQ domain using the legacy model, this + * should eventually be replaced with a linear IRQ domain as we get + * independent from the irq numbers with the switch to device tree. + */ + irq_start = NOMADIK_GPIO_TO_IRQ(pdata->first_gpio); + irq_base = irq_alloc_descs(irq_start, 0, NMK_GPIO_PER_CHIP, + numa_node_id()); + if (IS_ERR_VALUE(irq_base)) { + WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n", + irq_start); + irq_base = irq_start; + } nmk_chip->domain = irq_domain_add_legacy(np, NMK_GPIO_PER_CHIP, - NOMADIK_GPIO_TO_IRQ(pdata->first_gpio), - 0, &nmk_gpio_irq_simple_ops, nmk_chip); + irq_base, 0, + &nmk_gpio_irq_simple_ops, nmk_chip); if (!nmk_chip->domain) { dev_err(&dev->dev, "failed to create irqdomain\n"); ret = -ENOSYS; -- 1.7.11.3
| |