lkml.org 
[lkml]   [2012]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] gpio: samsung: Fix off-by-one bug in gpio addresses
Date
Move gpc4 to the end of the automatically processed gpio controllers so
we don't taint the automatic offset calculation.

This bug caused all controllers coming after gpc4 to map to the
incorrect address. The result is <&gpd1 0 0 0 0> would actually map to
GPIO 0 in gpd0.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
drivers/gpio/gpio-samsung.c | 14 +++++++-------
1 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index b6453d0..e4599b4 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -2454,12 +2454,6 @@ static struct samsung_gpio_chip exynos5_gpios_1[] = {
},
}, {
.chip = {
- .base = EXYNOS5_GPC4(0),
- .ngpio = EXYNOS5_GPIO_C4_NR,
- .label = "GPC4",
- },
- }, {
- .chip = {
.base = EXYNOS5_GPD0(0),
.ngpio = EXYNOS5_GPIO_D0_NR,
.label = "GPD0",
@@ -2513,6 +2507,12 @@ static struct samsung_gpio_chip exynos5_gpios_1[] = {
.label = "GPY6",
},
}, {
+ .chip = {
+ .base = EXYNOS5_GPC4(0),
+ .ngpio = EXYNOS5_GPIO_C4_NR,
+ .label = "GPC4",
+ },
+ }, {
.config = &samsung_gpio_cfgs[9],
.irq_base = IRQ_EINT(0),
.chip = {
@@ -2833,7 +2833,7 @@ static __init void exynos5_gpiolib_init(void)
}

/* need to set base address for gpc4 */
- exynos5_gpios_1[11].base = gpio_base1 + 0x2E0;
+ exynos5_gpios_1[20].base = gpio_base1 + 0x2E0;

/* need to set base address for gpx */
chip = &exynos5_gpios_1[21];
--
1.7.7.3


\
 
 \ /
  Last update: 2012-07-20 23:41    [W:0.060 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site