lkml.org 
[lkml]   [2012]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] [trivial] cpufreq: Fix typo in cpufreq driver
Date
Correct spelling typo in cpufreq driver.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
---
drivers/cpufreq/s3c2416-cpufreq.c | 4 ++--
drivers/cpufreq/speedstep-ich.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c
index 50d2f15..bcc053b 100644
--- a/drivers/cpufreq/s3c2416-cpufreq.c
+++ b/drivers/cpufreq/s3c2416-cpufreq.c
@@ -153,7 +153,7 @@ static int s3c2416_cpufreq_enter_dvs(struct s3c2416_data *s3c_freq, int idx)
if (s3c_freq->vddarm) {
dvfs = &s3c2416_dvfs_table[idx];

- pr_debug("cpufreq: setting regultor to %d-%d\n",
+ pr_debug("cpufreq: setting regulator to %d-%d\n",
dvfs->vddarm_min, dvfs->vddarm_max);
ret = regulator_set_voltage(s3c_freq->vddarm,
dvfs->vddarm_min,
@@ -186,7 +186,7 @@ static int s3c2416_cpufreq_leave_dvs(struct s3c2416_data *s3c_freq, int idx)
if (s3c_freq->vddarm) {
dvfs = &s3c2416_dvfs_table[idx];

- pr_debug("cpufreq: setting regultor to %d-%d\n",
+ pr_debug("cpufreq: setting regulator to %d-%d\n",
dvfs->vddarm_min, dvfs->vddarm_max);
ret = regulator_set_voltage(s3c_freq->vddarm,
dvfs->vddarm_min,
diff --git a/drivers/cpufreq/speedstep-ich.c b/drivers/cpufreq/speedstep-ich.c
index 7432b3a..e29b59a 100644
--- a/drivers/cpufreq/speedstep-ich.c
+++ b/drivers/cpufreq/speedstep-ich.c
@@ -203,7 +203,7 @@ static unsigned int speedstep_detect_chipset(void)
if (speedstep_chipset_dev) {
/* speedstep.c causes lockups on Dell Inspirons 8000 and
* 8100 which use a pretty old revision of the 82815
- * host brige. Abort on these systems.
+ * host bridge. Abort on these systems.
*/
static struct pci_dev *hostbridge;

--
1.7.11.2.249.g31c7954


\
 
 \ /
  Last update: 2012-07-18 04:01    [W:0.027 / U:0.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site