Messages in this thread Patch in this message | | | From | Sebastian Benvenuti <> | Subject | [PATCH 4/4] Staging: comedi: ssv_dnp: Syntax issues fixed | Date | Fri, 29 Jun 2012 12:33:52 -0300 |
| |
Changed "printk(KERN_X" to "pr_x(" and line lenght issues
Signed-off-by: Sebastian Benvenuti <sebastianbenvenuti@gmail.com> --- drivers/staging/comedi/drivers/s526.c | 40 +++++++++++++++++------------------ 1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c index 7a56434..c3abe82 100644 --- a/drivers/staging/comedi/drivers/s526.c +++ b/drivers/staging/comedi/drivers/s526.c @@ -241,7 +241,7 @@ static int s526_gpct_rinsn(struct comedi_device *dev, /* Check if (n > 0) */ if (insn->n <= 0) { - printk(KERN_ERR "s526: INSN_READ: n should be > 0\n"); + pr_err("s526: INSN_READ: n should be > 0\n"); return -EINVAL; } /* Read the low word first */ @@ -284,7 +284,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev, data[2]: Pre-load Register Value data[3]: Conter Control Register */ - printk(KERN_INFO "s526: GPCT_INSN_CONFIG: Configuring Encoder\n"); + pr_info("s526: GPCT_INSN_CONFIG: Configuring Encoder\n"); devpriv->s526_gpct_config[subdev_channel].app = PositionMeasurement; @@ -391,7 +391,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev, data[3]: Pre-load Register 1 Value data[4]: Conter Control Register */ - printk(KERN_INFO "s526: GPCT_INSN_CONFIG: Configuring SPG\n"); + pr_info("s526: GPCT_INSN_CONFIG: Configuring SPG\n"); devpriv->s526_gpct_config[subdev_channel].app = SinglePulseGeneration; @@ -436,7 +436,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev, data[3]: Pre-load Register 1 Value data[4]: Conter Control Register */ - printk(KERN_INFO "s526: GPCT_INSN_CONFIG: Configuring PTG\n"); + pr_info("s526: GPCT_INSN_CONFIG: Configuring PTG\n"); devpriv->s526_gpct_config[subdev_channel].app = PulseTrainGeneration; @@ -474,7 +474,7 @@ static int s526_gpct_insn_config(struct comedi_device *dev, break; default: - printk(KERN_ERR "s526: unsupported GPCT_insn_config\n"); + pr_err("s526: unsupported GPCT_insn_config\n"); return -EINVAL; break; } @@ -490,21 +490,21 @@ static int s526_gpct_winsn(struct comedi_device *dev, short value; union cmReg cmReg; - printk(KERN_INFO "s526: GPCT_INSN_WRITE on channel %d\n", + pr_info("s526: GPCT_INSN_WRITE on channel %d\n", subdev_channel); cmReg.value = inw(ADDR_CHAN_REG(REG_C0M, subdev_channel)); - printk(KERN_INFO "s526: Counter Mode Register: %x\n", cmReg.value); + pr_info("s526: Counter Mode Register: %x\n", cmReg.value); /* Check what Application of Counter this channel is configured for */ switch (devpriv->s526_gpct_config[subdev_channel].app) { case PositionMeasurement: - printk(KERN_INFO "S526: INSN_WRITE: PM\n"); + pr_info("S526: INSN_WRITE: PM\n"); outw(0xFFFF & ((*data) >> 16), ADDR_CHAN_REG(REG_C0H, subdev_channel)); outw(0xFFFF & (*data), ADDR_CHAN_REG(REG_C0L, subdev_channel)); break; case SinglePulseGeneration: - printk(KERN_INFO "S526: INSN_WRITE: SPG\n"); + pr_info("S526: INSN_WRITE: SPG\n"); outw(0xFFFF & ((*data) >> 16), ADDR_CHAN_REG(REG_C0H, subdev_channel)); outw(0xFFFF & (*data), ADDR_CHAN_REG(REG_C0L, subdev_channel)); @@ -517,14 +517,14 @@ static int s526_gpct_winsn(struct comedi_device *dev, The above periods must be expressed as a multiple of the pulse frequency on the selected source */ - printk(KERN_INFO "S526: INSN_WRITE: PTG\n"); + pr_info("S526: INSN_WRITE: PTG\n"); if ((insn->data[1] > insn->data[0]) && (insn->data[0] > 0)) { (devpriv->s526_gpct_config[subdev_channel]).data[0] = insn->data[0]; (devpriv->s526_gpct_config[subdev_channel]).data[1] = insn->data[1]; } else { - printk(KERN_ERR "s526: INSN_WRITE: PTG: Problem with Pulse params -> %d %d\n", + pr_err("s526: INSN_WRITE: PTG: Problem with Pulse params -> %d %d\n", insn->data[0], insn->data[1]); return -EINVAL; } @@ -613,7 +613,7 @@ static int s526_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, if (i == TIMEOUT) { /* printk() should be used instead of printk() * whenever the code can be called from real-time. */ - printk(KERN_ERR "s526: ADC(0x%04x) timeout\n", + pr_err("s526: ADC(0x%04x) timeout\n", inw(ADDR_REG(REG_ISR))); return -ETIMEDOUT; } @@ -712,7 +712,7 @@ static int s526_dio_insn_config(struct comedi_device *dev, int chan = CR_CHAN(insn->chanspec); int group, mask; - printk(KERN_INFO "S526 DIO insn_config\n"); + pr_info("S526 DIO insn_config\n"); /* The input or output configuration of each digital line is * configured by a special insn_config instruction. chanspec @@ -751,7 +751,7 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it) /* int subdev_channel = 0; */ union cmReg cmReg; - printk(KERN_INFO "comedi%d: s526: ", dev->minor); + pr_info("comedi%d: s526: ", dev->minor); iobase = it->options[0]; if (!iobase || !request_region(iobase, S526_IOSIZE, thisboard->name)) { @@ -850,7 +850,7 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it) s->type = COMEDI_SUBD_UNUSED; } - printk(KERN_INFO "attached\n"); + pr_info("attached\n"); return 1; @@ -897,11 +897,11 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it) cmReg.reg.reserved = 0; n = 0; - printk(KERN_INFO "Mode reg=0x%04x, 0x%04lx\n", + pr_info("Mode reg=0x%04x, 0x%04lx\n", cmReg.value, ADDR_CHAN_REG(REG_C0M, n)); outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n)); udelay(1000); - printk(KERN_INFO "Read back mode reg=0x%04x\n", + pr_info("Read back mode reg=0x%04x\n", inw(ADDR_CHAN_REG(REG_C0M, n))); /* Load the pre-load register high word */ @@ -925,14 +925,14 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it) outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n)); udelay(1000); - printk(KERN_INFO "Read back mode reg=0x%04x\n", + pr_info("Read back mode reg=0x%04x\n", inw(ADDR_CHAN_REG(REG_C0M, n))); #endif - printk(KERN_INFO "Current registres:\n"); + pr_info("Current registres:\n"); for (i = 0; i < S526_NUM_PORTS; i++) { - printk(KERN_INFO "0x%02lx: 0x%04x\n", + pr_info("0x%02lx: 0x%04x\n", ADDR_REG(s526_ports[i]), inw(ADDR_REG(s526_ports[i]))); } return 1; -- 1.7.11.1
| |