lkml.org 
[lkml]   [2012]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH RFT] regulator: s5m8767: Convert ot regulator_list_voltage_linear
From
Date
In current code, .list_voltage and .set_voltage_sel callbacks for BUCK7 and
BUCK8 return -EINVAL.

This patch adds s5m8767_buck78_ops for BUCK7 and BUCK8 which does not set
.list_voltage, .get_voltage_sel and .set_voltage_sel. ( This has the same
effect of returning -EINVAL in the callbacks)

Then for all the users of s5m8767_list_voltage, we don't need to worry about
the case reg_voltage_map[reg_id] is NULL.
So we can convert s5m8767_list_voltage to regulator_list_voltage_linear.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/s5m8767.c | 46 ++++++++++++++++++++-----------------------
1 file changed, 21 insertions(+), 25 deletions(-)

diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index fafc9a4..d484108 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -120,27 +120,6 @@ static const struct s5m_voltage_desc *reg_voltage_map[] = {
[S5M8767_BUCK9] = &buck_voltage_val3,
};

-static int s5m8767_list_voltage(struct regulator_dev *rdev,
- unsigned int selector)
-{
- const struct s5m_voltage_desc *desc;
- int reg_id = rdev_get_id(rdev);
- int val;
-
- if (reg_id >= ARRAY_SIZE(reg_voltage_map) || reg_id < 0)
- return -EINVAL;
-
- desc = reg_voltage_map[reg_id];
- if (desc == NULL)
- return -EINVAL;
-
- val = desc->min + desc->step * selector;
- if (val > desc->max)
- return -EINVAL;
-
- return val;
-}
-
static unsigned int s5m8767_opmode_reg[][4] = {
/* {OFF, ON, LOWPOWER, SUSPEND} */
/* LDO1 ... LDO28 */
@@ -448,7 +427,7 @@ static int s5m8767_set_voltage_time_sel(struct regulator_dev *rdev,
}

static struct regulator_ops s5m8767_ops = {
- .list_voltage = s5m8767_list_voltage,
+ .list_voltage = regulator_list_voltage_linear,
.is_enabled = s5m8767_reg_is_enabled,
.enable = s5m8767_reg_enable,
.disable = s5m8767_reg_disable,
@@ -457,6 +436,12 @@ static struct regulator_ops s5m8767_ops = {
.set_voltage_time_sel = s5m8767_set_voltage_time_sel,
};

+static struct regulator_ops s5m8767_buck78_ops = {
+ .is_enabled = s5m8767_reg_is_enabled,
+ .enable = s5m8767_reg_enable,
+ .disable = s5m8767_reg_disable,
+};
+
#define s5m8767_regulator_desc(_name) { \
.name = #_name, \
.id = S5M8767_##_name, \
@@ -465,6 +450,14 @@ static struct regulator_ops s5m8767_ops = {
.owner = THIS_MODULE, \
}

+#define s5m8767_regulator_buck78_desc(_name) { \
+ .name = #_name, \
+ .id = S5M8767_##_name, \
+ .ops = &s5m8767_buck78_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+}
+
static struct regulator_desc regulators[] = {
s5m8767_regulator_desc(LDO1),
s5m8767_regulator_desc(LDO2),
@@ -500,8 +493,8 @@ static struct regulator_desc regulators[] = {
s5m8767_regulator_desc(BUCK4),
s5m8767_regulator_desc(BUCK5),
s5m8767_regulator_desc(BUCK6),
- s5m8767_regulator_desc(BUCK7),
- s5m8767_regulator_desc(BUCK8),
+ s5m8767_regulator_buck78_desc(BUCK7),
+ s5m8767_regulator_buck78_desc(BUCK8),
s5m8767_regulator_desc(BUCK9),
};

@@ -698,9 +691,12 @@ static __devinit int s5m8767_pmic_probe(struct platform_device *pdev)
int id = pdata->regulators[i].id;

desc = reg_voltage_map[id];
- if (desc)
+ if (desc) {
regulators[id].n_voltages =
(desc->max - desc->min) / desc->step + 1;
+ regulators[id].min_uV = desc->min;
+ regulators[id].uV_step = desc->step;
+ }

config.dev = s5m8767->dev;
config.init_data = pdata->regulators[i].initdata;
--
1.7.9.5




\
 
 \ /
  Last update: 2012-06-18 10:21    [W:0.030 / U:0.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site