lkml.org 
[lkml]   [2012]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 14/22 v4] Input: atmel_mxt_ts - don't re-read matrix after applying pdata
Daniel Kurtz wrote:
> The matrix x/y size in the Info ID Block represents the number of x/y
> trace lines on the device. There is no need to re-read them after
> applying pdata config, since pdata only configures the object table
> etnries. The matrix size read from the ID can only be updated by a
> firmware update.

This isn't correct. For example, mXT224 can be configured as 16x14, 17x13,
18x12, etc. This only takes effect when the chip is reset, which is why it
is necessary to re-read them after applying the config.

cheers

--
Nick Dyer
Software Engineer, ITDev Ltd
Hardware and Software Development Consultancy
Website: http://www.itdev.co.uk


\
 
 \ /
  Last update: 2012-06-18 18:01    [W:0.227 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site