lkml.org 
[lkml]   [2012]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH RFC] regulator: core: Support table based mapping in regulator_set_voltage_time_sel
From
Date
For table based mapping, we can calculate voltage difference by below equation:
abs(rdev->desc->volt_table[new_selector] - rdev->desc->volt_table[old_selector])

Thus we can make regulator_set_voltage_time_sel work for table based mapping.

regulator_set_voltage_time_sel() only supports linear or table based mapping.
In case it is misused, also warn if neither linear nor table based mapping
is used with regulator_set_voltage_time_sel().

Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/core.c | 37 +++++++++++++++++++++++++------------
1 file changed, 25 insertions(+), 12 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index c9a427b..bf0306f 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2305,25 +2305,38 @@ EXPORT_SYMBOL_GPL(regulator_set_voltage_time);
* Provided with the starting and target voltage selectors, this function
* returns time in microseconds required to rise or fall to this new voltage
*
- * Drivers providing uV_step in their regulator_desc and ramp_delay in
- * regulation_constraints can use this as their set_voltage_time_sel()
- * operation.
+ * Drivers providing uV_step or volt_table in their regulator_desc and
+ * ramp_delay in regulation_constraints can use this as their
+ * set_voltage_time_sel() operation.
*/
int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int old_selector,
unsigned int new_selector)
{
- if (rdev->desc->uV_step) {
- if (rdev->constraints->ramp_delay)
- return DIV_ROUND_UP(rdev->desc->uV_step *
- abs(new_selector - old_selector),
- rdev->constraints->ramp_delay * 1000);
- if (rdev->desc->ramp_delay)
- return DIV_ROUND_UP(rdev->desc->uV_step *
- abs(new_selector - old_selector),
- rdev->desc->ramp_delay * 1000);
+ unsigned int ramp_delay = 0;
+
+ if (rdev->constraints->ramp_delay)
+ ramp_delay = rdev->constraints->ramp_delay;
+ else if (rdev->desc->ramp_delay)
+ ramp_delay = rdev->desc->ramp_delay;
+
+ if (ramp_delay == 0) {
rdev_warn(rdev, "ramp_delay not set\n");
+ return 0;
}
+
+ if (rdev->desc->uV_step) {
+ return DIV_ROUND_UP(rdev->desc->uV_step *
+ abs(new_selector - old_selector),
+ ramp_delay * 1000);
+ } else if (rdev->desc->volt_table) {
+ return DIV_ROUND_UP(abs(rdev->desc->volt_table[new_selector] -
+ rdev->desc->volt_table[old_selector]),
+ ramp_delay * 1000);
+ } else {
+ rdev_warn(rdev, "Unsupported voltage mapping settings\n");
+ }
+
return 0;
}

--
1.7.9.5




\
 
 \ /
  Last update: 2012-06-18 05:01    [W:0.036 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site