lkml.org 
[lkml]   [2012]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Subject[GIT PULL] target for-next v3.5-rc1 updates + new drivers merge status
From
Date
Hi Linus & Co,

With the v3.5 merge window now officially upon us, here is the first
pull request for the current set of target pending for-next core +
existing fabric module changes for the v3.5 round..

Please go ahead and pull from:

git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git for-next

Thank you to everyone who has contributed this round.

There has been lots of work in existing code in a number of areas this
past cycle. The major highlights have been:

*) Removal of transport_do_task_sg_chain() from core + fabrics (Roland)
*) target-core: Removal of se_task abstraction from target-core and
enforce hw_max_sectors for pSCSI backends (hch)
*) Re-factoring of iscsi-target tx immediate/response queues (agrover)
*) Conversion of iscsi-target back to using target core memory allocation
logic (agrover)

We've had one last minute iscsi-target patch go into for-next to address
a nasty regression bug related to the target core allocation logic
conversion from agrover that is not included in friday's linux-next
build, but has been included in this series.

On the new fabric module code front for-3.5, here is a brief status
update for the three currently in flight this round:

*) usb-gadget target driver:

Sebastian Siewior's driver for supporting usb-gadget target mode
operation. This will be going out as a separate PULL request from
target-pending/usb-target-merge with subsystem maintainer ACKs.
There is one minor target-core patch in this series required to
function.

*) sbp ieee-1394/firewire target driver:

Chris Boot's driver for supportting the Serial Block Protocol (SBP)
across IEEE-1394 Firewire hardware. This will be going out as a
separate PULL request from target-pending/sbp-target-merge with two
additional drivers/firewire/ patches w/ subsystem maintainer ACKs.

*) qla2xxx LLD target mode infrastructure changes + tcm_qla2xxx:

The Qlogic >= 24xx series HW target mode LLD infrastructure patch-set
and tcm_qla2xxx fabric driver. Support for FC target mode using qla2xxx
LLD code has been officially submitted by Qlogic to James below, and is
currently outstanding but not yet merged into scsi.git/for-next..

[PATCH 00/22] qla2xxx: Updates for scsi "misc" branch
http://www.spinics.net/lists/linux-scsi/msg59350.html

Note there are *zero* direct dependencies upon this for-next series for
the qla2xxx LLD target + tcm_qla2xxx patches submitted above, and over
the last days the target mode team has been tracking down an tcm_qla2xxx
specific active I/O shutdown bug that appears to now be almost squashed
for 3.5-rc-fixes.

Please let us know if you have any concerns,

Thanks!

--nab

Andy Grover (13):
target/iscsi: Rename iscsi_cmd.i_list to iscsi_cmd.i_conn_node
target/iscsi: Misc cleanups from Agrover (round 1)
target/iscsi: Remove unneeded locking from iscsi_target_tx_thread
target/iscsi: Refactor target_tx_thread immediate+response queue
loops
target/iscsi: Misc cleanups from Agrover (round 2)
target: Rename target_allocate_tasks to target_setup_cmd_from_cdb
target: rewrite comment for generic_new_cmd
target/iscsi: Inline iscsit_allocate_se_cmd and *_for_tmr
target/iscsi: Move init_se_cmd closer to lookup_cmd_lun
target/iscsi: Eliminate iscsi_cmd.data_length
target/iscsi: Fold _decide_list_to_build into
_build_pdu_and_seq_lists
target: Call core_alua_check_nonop_delay in target_submit_cmd()
target/iscsi: Go back to core allocating data buffer for cmd

Bernhard Kohl (1):
target: add support for the WRITE_VERIFY command

Christoph Hellwig (16):
target: misc ramdisk backend cleanups
target: don't limit transfer sizes for the ramdisk backend
target: stop splitting commands into multiple tasks
target: remove the unused transport_limit_task_sectors helper
target: remove target_get_task_cdb
target: remove the task_lba field in struct se_task
target: remove the task_size field in struct se_task
target: remove the task_sectors field in struct se_task
target: replace ->execute_task with ->execute_cmd
target: always allocate a single task
target: simplify command to task linkage
target: move the state and execute lists to the command
target: remove struct se_task
target: remove the t_task_cdbs_left field in struct se_cmd
target: remove the t_task_cdbs_ex_left field in struct se_cmd
target: remove the t_se_count field in struct se_cmd

Dan Carpenter (3):
target/iscsi: cleanup some allocation style issues
target: lock => unlock typo in transport_lun_wait_for_tasks
iscsi-target: remove dead code in iscsi_check_valuelist_for_support

Jörn Engel (2):
target: cleanup transport_execute_tasks()
target: make target_put_session void

Nicholas Bellinger (6):
target: Remove obsolete DF_READ_ONLY usage
target: Enforce hw_max_sectors for SCF_SCSI_DATA_SG_IO_CDB
target: Remove max_sectors device attribute for modern se_task less
code
target: Fix MAINTENANCE_IN service action CDB checks to use lower 5
bits
target: Add MI_REPORT_TARGET_PGS ext. header + implict_trans_secs
attribute
iscsi-target: Fix iov_count calculation bug in iscsit_allocate_iovecs

Roland Dreier (3):
tcm_fc: Remove use of transport_do_task_sg_chain()
IB/srpt: Remove use of transport_do_task_sg_chain()
target: Remove transport_do_task_sg_chain() and associated detritus

Sebastian Andrzej Siewior (1):
target: add unknown size flag to target_submit_cmd()

Stefan Hajnoczi (1):
target: Handle GET_EVENT_STATUS_NOTIFICATION passthrough

mengcong (1):
target: Handle ATA_16 passthrough for pSCSI backend devices

drivers/infiniband/ulp/srpt/ib_srpt.c | 10 +-
drivers/target/iscsi/iscsi_target.c | 821 +++++++++---------
drivers/target/iscsi/iscsi_target.h | 3 +-
drivers/target/iscsi/iscsi_target_configfs.c | 2 +-
drivers/target/iscsi/iscsi_target_core.h | 12 +-
drivers/target/iscsi/iscsi_target_datain_values.c | 35 +-
drivers/target/iscsi/iscsi_target_erl0.c | 31 +-
drivers/target/iscsi/iscsi_target_erl1.c | 23 +-
drivers/target/iscsi/iscsi_target_erl2.c | 28 +-
drivers/target/iscsi/iscsi_target_parameters.c | 17 -
drivers/target/iscsi/iscsi_target_seq_pdu_list.c | 145 ++--
drivers/target/iscsi/iscsi_target_seq_pdu_list.h | 2 +-
drivers/target/iscsi/iscsi_target_tmr.c | 15 +-
drivers/target/iscsi/iscsi_target_util.c | 192 +----
drivers/target/iscsi/iscsi_target_util.h | 3 -
drivers/target/loopback/tcm_loop.c | 4 +-
drivers/target/target_core_alua.c | 100 ++-
drivers/target/target_core_alua.h | 14 +-
drivers/target/target_core_cdb.c | 118 +--
drivers/target/target_core_configfs.c | 25 +-
drivers/target/target_core_device.c | 84 +--
drivers/target/target_core_file.c | 131 +--
drivers/target/target_core_file.h | 4 -
drivers/target/target_core_iblock.c | 152 ++--
drivers/target/target_core_iblock.h | 1 -
drivers/target/target_core_internal.h | 25 +-
drivers/target/target_core_pr.c | 67 +-
drivers/target/target_core_pr.h | 8 +-
drivers/target/target_core_pscsi.c | 179 ++---
drivers/target/target_core_pscsi.h | 1 -
drivers/target/target_core_rd.c | 168 +---
drivers/target/target_core_rd.h | 20 -
drivers/target/target_core_tmr.c | 71 +-
drivers/target/target_core_tpg.c | 5 +-
drivers/target/target_core_transport.c | 994 ++++++---------------
drivers/target/tcm_fc/tfc_cmd.c | 18 +-
drivers/target/tcm_fc/tfc_conf.c | 3 -
drivers/target/tcm_fc/tfc_io.c | 2 +-
include/target/target_core_backend.h | 16 +-
include/target/target_core_base.h | 59 +-
include/target/target_core_fabric.h | 11 +-
41 files changed, 1315 insertions(+), 2304 deletions(-)


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2012-05-21 05:01    [W:0.123 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site