lkml.org 
[lkml]   [2012]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V3 2/4] regulator: tps62360: add dt support
On Saturday 12 May 2012 03:00 AM, Mark Brown wrote:
> * PGP Signed by an unknown key
>
> On Fri, May 11, 2012 at 09:05:01PM +0530, Laxman Dewangan wrote:
>
>> I think this is not require to enable always otherwise there may be
>> power dissipation from this path always, just when we off the rail
>> (disable rail or when go to shutdown so that the voltage output can
>> go down faster).
>> Should we add "unsigned en_discharge:1" in regulator init data but
>> did not get how core driver can use this flag specially when
>> shutdown?
> Oh, now you say this I think I remember discussing this with you before!
> This is pretty unusual for such hardware. Normally there's something in
> the digital block so that the discharge is only enabled if the regulator
> is disabled, if it's enabled then the discharge would automatically be
> taken off since actively discharging while enabled doesn't make sense
> and may in fact be actively harmful.
>

Just to share here with our new pmu which we got recently, the
discharge path behavior is exactly same as what Mark mentioned
It need to be enable always. The pmu auto disable the DISC path in
normal operation so there is no power dissipation but when it detects
the en_bit is written 0 or any external control is making the rail to be
off, it automatically turn on the path so that ramp-down can happen faster.
Just we need to enable this always.

> If the hardware doesn't do that then I'd expect the driver to take care
> of this if it implements the framework feature (once the framework
> feature is added).



\
 
 \ /
  Last update: 2012-05-20 09:41    [W:0.023 / U:0.564 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site