lkml.org 
[lkml]   [2012]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[ 14/78] mtd: doc2001plus: initialize writebufsize
3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

commit 71f60fbebf0f18dd4e855335a009efda251b1697 upstream.

The writebufsize concept was introduce by commit
"0e4ca7e mtd: add writebufsize field to mtd_info struct" and it represents
the maximum amount of data the device writes to the media at a time. This is
an important parameter for UBIFS which is used during recovery and which
basically defines how big a corruption caused by a power cut can be.

Set it to be equivalent to mtd->writesize because this is the maximum amount
of data the driver writes at a time.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/mtd/devices/doc2001plus.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mtd/devices/doc2001plus.c
+++ b/drivers/mtd/devices/doc2001plus.c
@@ -467,7 +467,7 @@ void DoCMilPlus_init(struct mtd_info *mt

mtd->type = MTD_NANDFLASH;
mtd->flags = MTD_CAP_NANDFLASH;
- mtd->writesize = 512;
+ mtd->writebufsize = mtd->writesize = 512;
mtd->oobsize = 16;
mtd->owner = THIS_MODULE;
mtd->erase = doc_erase;



\
 
 \ /
  Last update: 2012-04-12 02:07    [W:0.322 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site