lkml.org 
[lkml]   [2012]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[ 30/78] rtlwifi: rtl8192ce: rtl8192cu: rtl8192de: Fix low-gain setting when scanning
3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Larry Finger <Larry.Finger@lwfinger.net>

commit 643c61e119459e9d750087b7b34be94491efebf9 upstream.

In https://bugzilla.redhat.com/show_bug.cgi?id=770207, slowdowns of driver
rtl8192ce are reported. One fix (commit a9b89e2) has already been applied,
and it helped, but the maximum RX speed would still drop to 1 Mbps. As in
the previous fix, the initial gain was determined to be the problem; however,
the problem arises from a setting of the gain when scans are started.

Driver rtl8192de also has the same code structure - this one is fixed as well.

Reported-and-Tested-by: Ivan Pesin <ivan.pesin@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c | 2 +-
drivers/net/wireless/rtlwifi/rtl8192de/phy.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c
@@ -1968,7 +1968,7 @@ void rtl92c_phy_set_io(struct ieee80211_
break;
case IO_CMD_PAUSE_DM_BY_SCAN:
rtlphy->initgain_backup.xaagccore1 = dm_digtable.cur_igvalue;
- dm_digtable.cur_igvalue = 0x17;
+ dm_digtable.cur_igvalue = 0x37;
rtl92c_dm_write_dig(hw);
break;
default:
--- a/drivers/net/wireless/rtlwifi/rtl8192de/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/phy.c
@@ -3192,7 +3192,7 @@ static void rtl92d_phy_set_io(struct iee
break;
case IO_CMD_PAUSE_DM_BY_SCAN:
rtlphy->initgain_backup.xaagccore1 = de_digtable.cur_igvalue;
- de_digtable.cur_igvalue = 0x17;
+ de_digtable.cur_igvalue = 0x37;
rtl92d_dm_write_dig(hw);
break;
default:



\
 
 \ /
  Last update: 2012-04-12 02:03    [W:0.879 / U:0.904 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site