lkml.org 
[lkml]   [2012]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mtip32xx: fix incorrect value set for drv_cleanup_done, and re-initialize and start port in mtip_restart_port()
Date
From: Asai Thambi S P <asamymuthupa@micron.com>

This patch includes two changes:
* fix incorrect value set for drv_cleanup_done
* re-initialize and start port in mtip_restart_port()

Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
---
drivers/block/mtip32xx/mtip32xx.c | 19 ++++++++-----------
1 files changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 8eb81c9..04f69e6 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -422,6 +422,10 @@ static void mtip_init_port(struct mtip_port *port)
/* Clear any pending interrupts for this port */
writel(readl(port->mmio + PORT_IRQ_STAT), port->mmio + PORT_IRQ_STAT);

+ /* Clear any pending interrupts on the HBA. */
+ writel(readl(port->dd->mmio + HOST_IRQ_STAT),
+ port->dd->mmio + HOST_IRQ_STAT);
+
/* Enable port interrupts */
writel(DEF_PORT_IRQ, port->mmio + PORT_IRQ_MASK);
}
@@ -490,11 +494,9 @@ static void mtip_restart_port(struct mtip_port *port)
dev_warn(&port->dd->pdev->dev,
"COM reset failed\n");

- /* Clear SError, the PxSERR.DIAG.x should be set so clear it */
- writel(readl(port->mmio + PORT_SCR_ERR), port->mmio + PORT_SCR_ERR);
+ mtip_init_port(port);
+ mtip_start_port(port);

- /* Enable the DMA engine */
- mtip_enable_engine(port, 1);
}

/*
@@ -3359,9 +3361,6 @@ static int mtip_pci_probe(struct pci_dev *pdev,
return -ENOMEM;
}

- /* Set the atomic variable as 1 in case of SRSI */
- atomic_set(&dd->drv_cleanup_done, true);
-
atomic_set(&dd->resumeflag, false);

/* Attach the private data to this PCI device. */
@@ -3434,8 +3433,8 @@ iomap_err:
pci_set_drvdata(pdev, NULL);
return rv;
done:
- /* Set the atomic variable as 0 in case of SRSI */
- atomic_set(&dd->drv_cleanup_done, true);
+ /* Set the atomic variable as 0 */
+ atomic_set(&dd->drv_cleanup_done, false);

return rv;
}
@@ -3463,8 +3462,6 @@ static void mtip_pci_remove(struct pci_dev *pdev)
}
}
}
- /* Set the atomic variable as 1 in case of SRSI */
- atomic_set(&dd->drv_cleanup_done, true);

/* Clean up the block layer. */
mtip_block_remove(dd);
--
1.7.1


\
 
 \ /
  Last update: 2012-03-07 03:39    [W:0.033 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site