lkml.org 
[lkml]   [2012]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/7] SATA ZPODD support
Date
Hi all,

This is the v3 patches to add SATA ZPODD support.

I split the ACPI D3Cold state support patches out.
You can find it here:

[PATCH v2 0/2] ACPI D3Cold state support
https://lkml.org/lkml/2012/3/27/52

v3:
- Split the ACPI D3Cold state support patches out
- Adds "Device Attention" bit check

v2:
- _PR3 indicates D3Cold support
- move can_power_off flag to pm_subsys_data
- allow all combinations of power resource and device
- split patches into smaller ones to make review easy

v1:
https://lkml.org/lkml/2012/2/13/86

[PATCH v3 1/7] libata-acpi: set acpi state for SATA port
[PATCH v3 2/7] libata-acpi: add ata port runtime D3Cold support
[PATCH v3 3/7] libata-acpi: register/unregister device to/from power resource
[PATCH v3 4/7] libata: detech Device Attention support
[PATCH v3 5/7] libata: tell scsi layer device supports runtime power off
[PATCH v3 6/7] PM / Runtime: Add can_power_off flag to subsys data
[PATCH v3 7/7] [SCSI] sr: adds Zero-power ODD support

drivers/ata/libata-acpi.c | 137 +++++++++++++++++++++++++++++++++++++++----
drivers/ata/libata-core.c | 3 +
drivers/ata/libata-scsi.c | 8 ++-
drivers/ata/libata.h | 8 +-
drivers/scsi/scsi_pm.c | 8 +++
drivers/scsi/sr.c | 44 ++++++++++++++
drivers/scsi/sr.h | 2 +
include/linux/ata.h | 1 +
include/linux/libata.h | 2 +
include/linux/pm.h | 1 +
include/scsi/scsi_device.h | 3 +
11 files changed, 197 insertions(+), 20 deletions(-)



\
 
 \ /
  Last update: 2012-03-28 08:25    [W:1.993 / U:3.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site