lkml.org 
[lkml]   [2012]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] staging:rts_pstor:Avoid "Bad target number" message when probing driver
Date
From: wwang <wei_wang@realsil.com.cn>

Avoid "Bad LUN" and "Bad target number" message by setting the supported
max_lun and max_id for the scsi host

Signed-off-by: wwang <wei_wang@realsil.com.cn>
---
drivers/staging/rts_pstor/rtsx.c | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/drivers/staging/rts_pstor/rtsx.c b/drivers/staging/rts_pstor/rtsx.c
index a7feb3e..1dccd93 100644
--- a/drivers/staging/rts_pstor/rtsx.c
+++ b/drivers/staging/rts_pstor/rtsx.c
@@ -1000,6 +1000,11 @@ static int __devinit rtsx_probe(struct pci_dev *pci,

rtsx_init_chip(dev->chip);

+ /* set the supported max_lun and max_id for the scsi host
+ * NOTE: the minimal value of max_id is 1 */
+ host->max_id = 1;
+ host->max_lun = dev->chip->max_lun;
+
/* Start up our control thread */
th = kthread_run(rtsx_control_thread, dev, CR_DRIVER_NAME);
if (IS_ERR(th)) {
--
1.7.5.4


\
 
 \ /
  Last update: 2012-03-27 10:51    [W:0.027 / U:1.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site