lkml.org 
[lkml]   [2012]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[V2 PATCH 0/2] Provide workarounds to use DRM/KMS with broken graphics hardware
This is V2 of a patchset to use DRM/KMS with broken graphics hardware.

As a major change from V1, generic EDID data are now built-in into the
drm_kms_helper module as proposed by Alan. To help people building
their own EDID data and to understand how the binary EDID blobs in
drivers/gpu/drm/drm_edid_load.c have been created, the entire material
went into the Documentation tree as suggested by Valdis. Finally, David
showed a much better way to explicitly disable and enable a particular
connector, so patch 02/03 could go.

The two remaining patches
- introduce a mechanism to define or load EDID data instead of letting the
controller probe for it,
- add a parameter to the i915 module to invert the sense of the backlight
brightness variable for broken controllers that require this.

-Carsten.



\
 
 \ /
  Last update: 2012-03-15 00:59    [W:0.061 / U:1.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site