lkml.org 
[lkml]   [2012]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[RESEND] [PATCH] media: ir-sony-decoder: 15bit function decode fix
The raw Sony IR decoder decodes 15bit messages slightly incorrectly.
To decode the function number, it shifts the bits right by 7 so that the
function is in bits 7:1, masks with 0xFD (0b11111101), and does an 8 bit
reverse so it ends up in bits 6:0. The mask should be 0xFE to correspond
with bits 7:1 (0b11111110).

The old mask had the effect of dropping the MSB of the function number
from bit 6, and leaving the LSB of the device number in bit 7.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
---

(note, i don't have a 15bit sony remote to test this with, but i'm
pretty confident of it's correctness based on this:
http://picprojects.org.uk/projects/sirc/sonysirc.pdf )

drivers/media/rc/ir-sony-decoder.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/media/rc/ir-sony-decoder.c b/drivers/media/rc/ir-sony-decoder.c
index d5e2b50..dab98b3 100644
--- a/drivers/media/rc/ir-sony-decoder.c
+++ b/drivers/media/rc/ir-sony-decoder.c
@@ -130,7 +130,7 @@ static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev)
case 15:
device = bitrev8((data->bits >> 0) & 0xFF);
subdevice = 0;
- function = bitrev8((data->bits >> 7) & 0xFD);
+ function = bitrev8((data->bits >> 7) & 0xFE);
break;
case 20:
device = bitrev8((data->bits >> 5) & 0xF8);
--
1.7.2.3



\
 
 \ /
  Last update: 2012-02-27 12:55    [W:0.062 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site