lkml.org 
[lkml]   [2012]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[V2 PATCH 1/2] rtc: sa1100: move clock enable/disable to probe/remove
Date
The original sa1100_rtc_open/sa1100_rtc_release will be called
when the /dev/rtc0 is opened or closed.
In fact, these two functions will enable/disable the clock.
Disabling clock will make rtc not work.
So only enable/disable clock when probe/remove the device.

Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
drivers/rtc/rtc-sa1100.c | 11 ++++++-----
1 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 50a5c4a..34f66b8 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -108,9 +108,6 @@ static int sa1100_rtc_open(struct device *dev)
struct rtc_device *rtc = info->rtc;
int ret;

- ret = clk_prepare_enable(info->clk);
- if (ret)
- goto fail_clk;
ret = request_irq(info->irq_1hz, sa1100_rtc_interrupt, 0, "rtc 1Hz", dev);
if (ret) {
dev_err(dev, "IRQ %d already in use.\n", info->irq_1hz);
@@ -130,7 +127,6 @@ static int sa1100_rtc_open(struct device *dev)
free_irq(info->irq_1hz, dev);
fail_ui:
clk_disable_unprepare(info->clk);
- fail_clk:
return ret;
}

@@ -144,7 +140,6 @@ static void sa1100_rtc_release(struct device *dev)

free_irq(info->irq_alarm, dev);
free_irq(info->irq_1hz, dev);
- clk_disable_unprepare(info->clk);
}

static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
@@ -253,6 +248,9 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
spin_lock_init(&info->lock);
platform_set_drvdata(pdev, info);

+ ret = clk_prepare_enable(info->clk);
+ if (ret)
+ goto err_enable_clk;
/*
* According to the manual we should be able to let RTTR be zero
* and then a default diviser for a 32.768KHz clock is used.
@@ -305,6 +303,8 @@ static int sa1100_rtc_probe(struct platform_device *pdev)

return 0;
err_dev:
+ clk_disable_unprepare(info->clk);
+err_enable_clk:
platform_set_drvdata(pdev, NULL);
clk_put(info->clk);
err_clk:
@@ -318,6 +318,7 @@ static int sa1100_rtc_remove(struct platform_device *pdev)

if (info) {
rtc_device_unregister(info->rtc);
+ clk_disable_unprepare(info->clk);
clk_put(info->clk);
platform_set_drvdata(pdev, NULL);
kfree(info);
--
1.7.4.1


\
 
 \ /
  Last update: 2012-12-05 08:22    [W:0.198 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site