lkml.org 
[lkml]   [2012]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 1/2] ARM: davinci: dm365: add support for v4l2 video display
On 12/3/2012 1:51 PM, Prabhakar Lad wrote:
> From: Manjunath Hadli <manjunath.hadli@ti.com>
>
> Create platform devices for various video modules like venc,osd,
> vpbe and v4l2 driver for dm365.
>
> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
> ---
> arch/arm/mach-davinci/board-dm365-evm.c | 4 +-
> arch/arm/mach-davinci/davinci.h | 2 +-
> arch/arm/mach-davinci/dm365.c | 203 +++++++++++++++++++++++++++++--
> 3 files changed, 195 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
> index 1b4a8ad..0c3dae6 100644
> --- a/arch/arm/mach-davinci/board-dm365-evm.c
> +++ b/arch/arm/mach-davinci/board-dm365-evm.c
> @@ -564,8 +564,6 @@ static struct davinci_uart_config uart_config __initdata = {
>
> static void __init dm365_evm_map_io(void)
> {
> - /* setup input configuration for VPFE input devices */
> - dm365_set_vpfe_config(&vpfe_cfg);
> dm365_init();
> }
>
> @@ -597,6 +595,8 @@ static __init void dm365_evm_init(void)
>
> davinci_setup_mmc(0, &dm365evm_mmc_config);
>
> + dm365_init_video(&vpfe_cfg, NULL);
> +
> /* maybe setup mmc1/etc ... _after_ mmc0 */
> evm_init_cpld();
>
> diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
> index 12d544b..1c2670f 100644
> --- a/arch/arm/mach-davinci/davinci.h
> +++ b/arch/arm/mach-davinci/davinci.h
> @@ -84,7 +84,7 @@ void __init dm365_init_ks(struct davinci_ks_platform_data *pdata);
> void __init dm365_init_rtc(void);
> void dm365_init_spi0(unsigned chipselect_mask,
> const struct spi_board_info *info, unsigned len);
> -void dm365_set_vpfe_config(struct vpfe_config *cfg);
> +int __init dm365_init_video(struct vpfe_config *, struct vpbe_config *);
>
> /* DM644x function declarations */
> void __init dm644x_init(void);
> diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
> index b680c83..cada153 100644
> --- a/arch/arm/mach-davinci/dm365.c
> +++ b/arch/arm/mach-davinci/dm365.c
> @@ -40,10 +40,16 @@
>
> #define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */
>
> +#define DM3XX_VDAC_CONFIG 0x01c4002c
> +
> +#define DM365_RTC_BASE 0x01c69000
> +
> /* Base of key scan register bank */
> #define DM365_KEYSCAN_BASE 0x01c69400
>
> -#define DM365_RTC_BASE 0x01c69000
> +#define DM365_OSD_REG_BASE 0x01c71c00

Nit: Can you call it DM365_OSD_BASE. If we were to include REG in the
name, then it should be done consistently. So we would instead have
DM365_KEYSCAN_REG_BASE.

> +
> +#define DM365_VENC_REG_BASE 0x01c71e00
>
> #define DAVINCI_DM365_VC_BASE 0x01d0c000
> #define DAVINCI_DMA_VC_TX 2
> @@ -56,6 +62,11 @@
> #define DM365_EMAC_CNTRL_RAM_OFFSET 0x1000
> #define DM365_EMAC_CNTRL_RAM_SIZE 0x2000
>
> +#define DM365_VPSS_CLK_CTRL_ADDR 0x44
> +#define DM365_VPSS_VENCCLKEN_ENABLE BIT(3)
> +#define DM365_VPSS_DACCLKEN_ENABLE BIT(4)
> +#define DM365_VPSS_PLLC2SYSCLK5_ENABLE (BIT(5) & ~BIT(6))

This expression does not make much sense. It is same as BIT(5). You
needed a mask and an enable?

> +
> static struct pll_data pll1_data = {
> .num = 1,
> .phys_base = DAVINCI_PLL1_BASE,
> @@ -1232,6 +1243,186 @@ static struct platform_device dm365_isif_dev = {
> },
> };
>
> +static struct resource dm365_osd_resources[] = {
> + {
> + .start = DM365_OSD_REG_BASE,
> + .end = DM365_OSD_REG_BASE + 0x100,

.end = DM365_OSD_REG_BASE + 0xff,

A similar fix is needed multiple places below. Sorry, I did not notice
this last time around.

Thanks,
Sekhar


\
 
 \ /
  Last update: 2012-12-05 09:21    [W:0.084 / U:3.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site