lkml.org 
[lkml]   [2012]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/7] aoe: allow user to disable target failure timeout
From
Date
With this change, the aoe driver treats the value zero as special
for the aoe_deadsecs module parameter. Normally, this value
specifies the number of seconds during which the driver will
continue to attempt retransmits to an unresponsive AoE target.
After aoe_deadsecs has elapsed, the aoe driver marks the aoe
device as "down" and fails all I/O.

The new meaning of an aoe_deadsecs of zero is for the driver to
retransmit commands indefinitely.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
---
Documentation/aoe/aoe.txt | 4 +++-
drivers/block/aoe/aoecmd.c | 4 +++-
2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/Documentation/aoe/aoe.txt b/Documentation/aoe/aoe.txt
index bfc9cb1..c71487d 100644
--- a/Documentation/aoe/aoe.txt
+++ b/Documentation/aoe/aoe.txt
@@ -125,7 +125,9 @@ DRIVER OPTIONS
The aoe_deadsecs module parameter determines the maximum number of
seconds that the driver will wait for an AoE device to provide a
response to an AoE command. After aoe_deadsecs seconds have
- elapsed, the AoE device will be marked as "down".
+ elapsed, the AoE device will be marked as "down". A value of zero
+ is supported for testing purposes and makes the aoe driver keep
+ trying AoE commands forever.

The aoe_maxout module parameter has a default of 128. This is the
maximum number of unresponded packets that will be sent to an AoE
diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c
index da360f9..abf4ad2 100644
--- a/drivers/block/aoe/aoecmd.c
+++ b/drivers/block/aoe/aoecmd.c
@@ -812,7 +812,9 @@ rexmit_timer(ulong vp)
since = tsince_hr(f);
n = f->waited_total + since;
n /= USEC_PER_SEC;
- if (n > aoe_deadsecs && !(f->flags & FFL_PROBE)) {
+ if (aoe_deadsecs
+ && n > aoe_deadsecs
+ && !(f->flags & FFL_PROBE)) {
/* Waited too long. Device failure.
* Hang all frames on first hash bucket for downdev
* to clean up.
--
1.7.1


\
 
 \ /
  Last update: 2012-12-04 03:21    [W:2.440 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site