lkml.org 
[lkml]   [2012]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] [trivial] isdn: Fix typo in drivers/isdn
Date
Correct spelling typo in printk within drivers/isdn

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
---
drivers/isdn/hardware/mISDN/hfcpci.c | 2 +-
drivers/isdn/hardware/mISDN/mISDNisar.c | 2 +-
drivers/isdn/hisax/callc.c | 2 +-
drivers/isdn/hisax/hfc_pci.c | 2 +-
drivers/isdn/hisax/hfc_sx.c | 2 +-
drivers/isdn/pcbit/layer2.c | 2 +-
6 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index 81363ff..6e99d73 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -490,7 +490,7 @@ receive_dmsg(struct hfc_pci *hc)
(df->data[le16_to_cpu(zp->z1)])) {
if (dch->debug & DEBUG_HW)
printk(KERN_DEBUG
- "empty_fifo hfcpci paket inv. len "
+ "empty_fifo hfcpci packet inv. len "
"%d or crc %d\n",
rcnt,
df->data[le16_to_cpu(zp->z1)]);
diff --git a/drivers/isdn/hardware/mISDN/mISDNisar.c b/drivers/isdn/hardware/mISDN/mISDNisar.c
index 182ecf0..feafa91 100644
--- a/drivers/isdn/hardware/mISDN/mISDNisar.c
+++ b/drivers/isdn/hardware/mISDN/mISDNisar.c
@@ -1302,7 +1302,7 @@ modeisar(struct isar_ch *ch, u32 bprotocol)
&ch->is->Flags))
ch->dpath = 1;
else {
- pr_info("modeisar both pathes in use\n");
+ pr_info("modeisar both paths in use\n");
return -EBUSY;
}
if (bprotocol == ISDN_P_B_HDLC)
diff --git a/drivers/isdn/hisax/callc.c b/drivers/isdn/hisax/callc.c
index a47637b..ddec47a 100644
--- a/drivers/isdn/hisax/callc.c
+++ b/drivers/isdn/hisax/callc.c
@@ -35,7 +35,7 @@ static int chancount;
/* experimental REJECT after ALERTING for CALLBACK to beat the 4s delay */
#define ALERT_REJECT 0

-/* Value to delay the sending of the first B-channel paket after CONNECT
+/* Value to delay the sending of the first B-channel packet after CONNECT
* here is no value given by ITU, but experience shows that 300 ms will
* work on many networks, if you or your other side is behind local exchanges
* a greater value may be recommented. If the delay is to short the first paket
diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index 334fa90..f60d4be 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -354,7 +354,7 @@ receive_dmsg(struct IsdnCardState *cs)
if ((rcnt > MAX_DFRAME_LEN + 3) || (rcnt < 4) ||
(df->data[zp->z1])) {
if (cs->debug & L1_DEB_WARN)
- debugl1(cs, "empty_fifo hfcpci paket inv. len %d or crc %d", rcnt, df->data[zp->z1]);
+ debugl1(cs, "empty_fifo hfcpci packet inv. len %d or crc %d", rcnt, df->data[zp->z1]);
#ifdef ERROR_STATISTIC
cs->err_rx++;
#endif
diff --git a/drivers/isdn/hisax/hfc_sx.c b/drivers/isdn/hisax/hfc_sx.c
index 4db846b..4ec279c 100644
--- a/drivers/isdn/hisax/hfc_sx.c
+++ b/drivers/isdn/hisax/hfc_sx.c
@@ -270,7 +270,7 @@ read_fifo(struct IsdnCardState *cs, u_char fifo, int trans_max)

if ((count > fifo_size) || (count < 4)) {
if (cs->debug & L1_DEB_WARN)
- debugl1(cs, "hfcsx_read_fifo %d paket inv. len %d ", fifo , count);
+ debugl1(cs, "hfcsx_read_fifo %d packet inv. len %d ", fifo , count);
while (count) {
count--; /* empty fifo */
Read_hfc(cs, HFCSX_FIF_DRD);
diff --git a/drivers/isdn/pcbit/layer2.c b/drivers/isdn/pcbit/layer2.c
index a18e639..42ecfef 100644
--- a/drivers/isdn/pcbit/layer2.c
+++ b/drivers/isdn/pcbit/layer2.c
@@ -508,7 +508,7 @@ pcbit_irq_handler(int interrupt, void *devptr)
return IRQ_NONE;
}
if (dev->interrupt) {
- printk(KERN_DEBUG "pcbit: reentering interrupt hander\n");
+ printk(KERN_DEBUG "pcbit: reentering interrupt handler\n");
return IRQ_HANDLED;
}
dev->interrupt = 1;
--
1.8.0.rc3.16.g8ead1bf


\
 
 \ /
  Last update: 2012-11-09 16:21    [W:0.034 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site