lkml.org 
[lkml]   [2012]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH V3 4/5] Thermal: Add ST-Ericsson DB8500 thermal driver.
From
On 1 November 2012 09:52, Zhang, Rui <rui.zhang@intel.com> wrote:
>
>
>> -----Original Message-----
>> From: hongbo.zhang [mailto:hongbo.zhang@linaro.org]
>> Sent: Wednesday, October 31, 2012 12:49 AM
>> To: linaro-dev@lists.linaro.org; linux-kernel@vger.kernel.org; linux-
>> pm@vger.kernel.org; Zhang, Rui; amit.kachhap@linaro.org
>> Cc: patches@linaro.org; linaro-kernel@lists.linaro.org;
>> STEricsson_nomadik_linux@list.st.com; kernel@igloocommunity.org;
>> hongbo.zhang
>> Subject: [PATCH V3 4/5] Thermal: Add ST-Ericsson DB8500 thermal driver.
>> Importance: High
>>
>> From: "hongbo.zhang" <hongbo.zhang@linaro.com>
>>
>> This diver is based on the thermal management framework in
>> thermal_sys.c. A thermal zone device is created with the trip points to
>> which cooling devices can be bound, the current cooling device is
>> cpufreq, e.g. CPU frequency is clipped down to cool the CPU, and other
>> cooling devices can be added and bound to the trip points dynamically.
>> The platform specific PRCMU interrupts are used to active thermal
>> update when trip points are reached.
>>
>> Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com>
>> ---
>> .../devicetree/bindings/thermal/db8500-thermal.txt | 40 ++
>> drivers/thermal/Kconfig | 20 +
>> drivers/thermal/Makefile | 2 +
>> drivers/thermal/db8500_cpufreq_cooling.c | 108 +++++
>> drivers/thermal/db8500_thermal.c | 531
>> +++++++++++++++++++++
>> include/linux/platform_data/db8500_thermal.h | 38 ++
>> 6 files changed, 739 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/thermal/db8500-
>> thermal.txt
>> create mode 100644 drivers/thermal/db8500_cpufreq_cooling.c
>> create mode 100644 drivers/thermal/db8500_thermal.c create mode
>> 100644 include/linux/platform_data/db8500_thermal.h
>>
>> diff --git a/Documentation/devicetree/bindings/thermal/db8500-
>> thermal.txt b/Documentation/devicetree/bindings/thermal/db8500-
>> thermal.txt
>> new file mode 100644
>> index 0000000..cab6916
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/thermal/db8500-thermal.txt
>> @@ -0,0 +1,40 @@
>> +* ST-Ericsson DB8500 Thermal
>> +
>> +** Thermal node properties:
>> +
>> +- compatible : "stericsson,db8500-thermal";
>> +- reg : address range of the thermal sensor registers;
>> +- interrupts : interrupts generated from PRCMU;
>> +- interrupt-names : "IRQ_HOTMON_LOW" and "IRQ_HOTMON_HIGH";
>> +- num-trips : number of total trip points;
>> +- tripN-temp : temperature of trip point N, should be in ascending
>> +order;
>> +- tripN-type : type of trip point N, should be one of "active"
>> +"passive" "hot" "critical";
>> +- tripN-cdev-num : number of the cooling devices which can be bound to
>> +trip point N;
>> +- tripN-cdev-nameM : name of the No. M cooling device of trip point N;
>> +
>> +Usually the num-trips and tripN-*** are separated in board related dts
>> files.
>> +
>> +Example:
>> +thermal@801573c0 {
>> + compatible = "stericsson,db8500-thermal";
>> + reg = <0x801573c0 0x40>;
>> + interrupts = <21 0x4>, <22 0x4>;
>> + interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
>> +
>> + num-trips = <3>;
>> +
>> + trip0-temp = <70000>;
>> + trip0-type = "active";
>> + trip0-cdev-num = <1>;
>> + trip0-cdev-name0 = "thermal-cpufreq-0";
>> +
>> + trip1-temp = <75000>;
>> + trip1-type = "active";
>> + trip1-cdev-num = <2>;
>> + trip1-cdev-name0 = "thermal-cpufreq-0";
>> + trip1-cdev-name1 = "thermal-fan";
>> +
>> + trip2-temp = <85000>;
>> + trip2-type = "critical";
>> + trip2-cdev-num = <0>;
>> +}
>> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index
>> e1cb6bd..54c8fd0 100644
>> --- a/drivers/thermal/Kconfig
>> +++ b/drivers/thermal/Kconfig
>> @@ -31,6 +31,26 @@ config CPU_THERMAL
>> and not the ACPI interface.
>> If you want this support, you should say Y here.
>>
>> +config DB8500_THERMAL
>> + bool "DB8500 thermal management"
>> + depends on THERMAL
>> + default y
>> + help
>> + Adds DB8500 thermal management implementation according to the
>> thermal
>> + management framework. A thermal zone with several trip points
>> will be
>> + created. Cooling devices can be bound to the trip points to
>> cool this
>> + thermal zone if trip points reached.
>> +
>> +config DB8500_CPUFREQ_COOLING
>> + tristate "DB8500 cpufreq cooling"
>> + depends on CPU_THERMAL
>> + default y
>> + help
>> + Adds DB8500 cpufreq cooling devices, and these cooling devices
>> can be
>> + bound to thermal zone trip points. When a trip point reached,
>> the
>> + bound cpufreq cooling device turns active to set CPU frequency
>> low to
>> + cool down the CPU.
>> +
>> config SPEAR_THERMAL
>> bool "SPEAr thermal sensor driver"
>> depends on THERMAL
>> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index
>> 885550d..c7a8dab 100644
>> --- a/drivers/thermal/Makefile
>> +++ b/drivers/thermal/Makefile
>> @@ -7,3 +7,5 @@ obj-$(CONFIG_CPU_THERMAL) += cpu_cooling.o
>> obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o
>> obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o
>> obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o
>> +obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o
>> +obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o
>> diff --git a/drivers/thermal/db8500_cpufreq_cooling.c
>> b/drivers/thermal/db8500_cpufreq_cooling.c
>> new file mode 100644
>> index 0000000..4cf8e72
>> --- /dev/null
>> +++ b/drivers/thermal/db8500_cpufreq_cooling.c
>> @@ -0,0 +1,108 @@
>> +/*
>> + * db8500_cpufreq_cooling.c - DB8500 cpufreq works as cooling device.
>> + *
>> + * Copyright (C) 2012 ST-Ericsson
>> + * Copyright (C) 2012 Linaro Ltd.
>> + *
>> + * Author: Hongbo Zhang <hongbo.zhang@linaro.com>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> modify
>> + * it under the terms of the GNU General Public License as published
>> by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/cpu_cooling.h>
>> +#include <linux/cpufreq.h>
>> +#include <linux/err.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +
>> +static int db8500_cpufreq_cooling_probe(struct platform_device *pdev)
>> {
>> + struct thermal_cooling_device *cdev;
>> + struct cpumask mask_val;
>> +
>> + /* make sure cpufreq driver has been initialized */
>> + if (!cpufreq_frequency_get_table(0))
>> + return -EPROBE_DEFER;
>> +
>> + cpumask_set_cpu(0, &mask_val);
>> + cdev = cpufreq_cooling_register(&mask_val);
>> +
>> + if (IS_ERR_OR_NULL(cdev)) {
>> + dev_err(&pdev->dev, "Failed to register cooling device\n");
>> + return PTR_ERR(cdev);
>> + }
>> +
>> + platform_set_drvdata(pdev, cdev);
>> +
>> + dev_info(&pdev->dev, "Cooling device registered: %s\n", cdev-
>> >type);
>> +
>> + return 0;
>> +}
>> +
>> +static int db8500_cpufreq_cooling_remove(struct platform_device *pdev)
>> +{
>> + struct thermal_cooling_device *cdev = platform_get_drvdata(pdev);
>> +
>> + cpufreq_cooling_unregister(cdev);
>> +
>> + return 0;
>> +}
>> +
>> +static int db8500_cpufreq_cooling_suspend(struct platform_device *pdev,
>> + pm_message_t state)
>> +{
>> + return -ENOSYS;
>> +}
>> +
>> +static int db8500_cpufreq_cooling_resume(struct platform_device *pdev)
>> +{
>> + return -ENOSYS;
>> +}
>> +
>> +#ifdef CONFIG_OF
>> +static const struct of_device_id db8500_cpufreq_cooling_match[] = {
>> + { .compatible = "stericsson,db8500-cpufreq-cooling" },
>> + {},
>> +};
>> +#else
>> +#define db8500_cpufreq_cooling_match NULL #endif
>> +
>> +static struct platform_driver db8500_cpufreq_cooling_driver = {
>> + .driver = {
>> + .owner = THIS_MODULE,
>> + .name = "db8500-cpufreq-cooling",
>> + .of_match_table = db8500_cpufreq_cooling_match,
>> + },
>> + .probe = db8500_cpufreq_cooling_probe,
>> + .suspend = db8500_cpufreq_cooling_suspend,
>> + .resume = db8500_cpufreq_cooling_resume,
>> + .remove = db8500_cpufreq_cooling_remove, };
>> +
>> +static int __init db8500_cpufreq_cooling_init(void) {
>> + return platform_driver_register(&db8500_cpufreq_cooling_driver);
>> +}
>> +
>> +static void __exit db8500_cpufreq_cooling_exit(void) {
>> + platform_driver_unregister(&db8500_cpufreq_cooling_driver);
>> +}
>> +
>> +/* Should be later than db8500_cpufreq_register */
>> +late_initcall(db8500_cpufreq_cooling_init);
>> +module_exit(db8500_cpufreq_cooling_exit);
>> +
>> +MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@stericsson.com>");
>> +MODULE_DESCRIPTION("DB8500 cpufreq cooling driver");
>> +MODULE_LICENSE("GPL");
>> diff --git a/drivers/thermal/db8500_thermal.c
>> b/drivers/thermal/db8500_thermal.c
>> new file mode 100644
>> index 0000000..023f7b4
>> --- /dev/null
>> +++ b/drivers/thermal/db8500_thermal.c
>> @@ -0,0 +1,531 @@
>> +/*
>> + * db8500_thermal.c - DB8500 Thermal Management Implementation
>> + *
>> + * Copyright (C) 2012 ST-Ericsson
>> + * Copyright (C) 2012 Linaro Ltd.
>> + *
>> + * Author: Hongbo Zhang <hongbo.zhang@linaro.com>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> modify
>> + * it under the terms of the GNU General Public License as published
>> by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/cpu_cooling.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/mfd/dbx500-prcmu.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_data/db8500_thermal.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +#include <linux/thermal.h>
>> +
>> +#define PRCMU_DEFAULT_MEASURE_TIME 0xFFF
>> +#define PRCMU_DEFAULT_LOW_TEMP 0
>> +
>> +struct db8500_thermal_zone {
>> + struct thermal_zone_device *therm_dev;
>> + struct mutex th_lock;
>> + struct work_struct therm_work;
>> + struct db8500_thsens_platform_data *trip_tab;
>> + enum thermal_device_mode mode;
>> + enum thermal_trend trend;
>> + unsigned long cur_temp_pseudo;
>> + unsigned int cur_index;
>> +};
>> +
>> +/* Local function to check if thermal zone matches cooling devices */
>> +static int db8500_thermal_match_cdev(struct thermal_cooling_device
>> *cdev,
>> + struct db8500_trip_point *trip_points) {
>> + int i;
>> + char *cdev_name;
>> +
>> + if (!strlen(cdev->type))
>> + return -EINVAL;
>> +
>> + for (i = 0; i < COOLING_DEV_MAX; i++) {
>> + cdev_name = trip_points->cdev_name[i];
>> + if (!strcmp(cdev_name, cdev->type))
>> + return 0;
>> + }
>> +
>> + return -ENODEV;
>> +}
>> +
>> +/* Callback to bind cooling device to thermal zone */ static int
>> +db8500_cdev_bind(struct thermal_zone_device *thermal,
>> + struct thermal_cooling_device *cdev)
>> +{
>> + struct db8500_thermal_zone *pzone = thermal->devdata;
>> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab;
>> + unsigned long max_state, upper, lower;
>> + int i, ret = -EINVAL;
>> +
>> + for (i = 0; i < ptrips->num_trips; i++) {
>> + if (db8500_thermal_match_cdev(cdev, &ptrips-
>> >trip_points[i]))
>> + continue;
>> +
>> + cdev->ops->get_max_state(cdev, &max_state);
>
> Why not moving this line out of the loop
> so that you only need to call it once.
Good.

>
>> + lower = upper = (i > max_state) ? max_state : i;
>> +
>
> What does this mean?
> Say cooling device 0 matches trip point 3, and you want to use cooling state 3 only, for trip point 3?
> No matter how many cooling states the cooling device supports?
I would like to change lower = upper - 1 > 0 ? upper - 1 : 0;
More states for one trip point is meaningless on my platform, because
thermal framework polling thread isn't used, a PRCMU firmware high/low
interrupts are used to trigger thermal update instead(currently
platform limitation), thus thermal update is called only once when
trip point is crossed up/down.
More states for one trip points can be used on our SOC serials in
future when this limitation is removed.
>
> Thanks,
> rui
>> + ret = thermal_zone_bind_cooling_device(thermal, i, cdev,
>> + upper, lower);
>> +
>> + dev_info(&cdev->device, "%s bind to %d: %d-%s\n",
>> + cdev->type, i, ret, ret ? "fail" : "succeed");
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +/* Callback to unbind cooling device from thermal zone */ static int
>> +db8500_cdev_unbind(struct thermal_zone_device *thermal,
>> + struct thermal_cooling_device *cdev)
>> +{
>> + struct db8500_thermal_zone *pzone = thermal->devdata;
>> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab;
>> + int i, ret = -EINVAL;
>> +
>> + for (i = 0; i < ptrips->num_trips; i++) {
>> + if (db8500_thermal_match_cdev(cdev, &ptrips-
>> >trip_points[i]))
>> + continue;
>> +
>> + ret = thermal_zone_unbind_cooling_device(thermal, i, cdev);
>> +
>> + dev_info(&cdev->device, "%s unbind: %s\n",
>> + cdev->type, ret ? "fail" : "succeed");
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +/* Callback to get current temperature */ static int
>> +db8500_sys_get_temp(struct thermal_zone_device *thermal,
>> + unsigned long *temp)
>> +{
>> + struct db8500_thermal_zone *pzone = thermal->devdata;
>> +
>> + /*
>> + * TODO: There is no PRCMU interface to get temperature data
>> currently,
>> + * so a pseudo temperature is returned , it works for thermal
>> framework
>> + * and this will be fixed when the PRCMU interface is available.
>> + */
>> + *temp = pzone->cur_temp_pseudo;
>> +
>> + return 0;
>> +}
>> +
>> +/* Callback to get temperature changing trend */ static int
>> +db8500_sys_get_trend(struct thermal_zone_device *thermal,
>> + int trip, enum thermal_trend *trend)
>> +{
>> + struct db8500_thermal_zone *pzone = thermal->devdata;
>> +
>> + *trend = pzone->trend;
>> +
>> + return 0;
>> +}
>> +
>> +/* Callback to get thermal zone mode */ static int
>> +db8500_sys_get_mode(struct thermal_zone_device *thermal,
>> + enum thermal_device_mode *mode)
>> +{
>> + struct db8500_thermal_zone *pzone = thermal->devdata;
>> +
>> + mutex_lock(&pzone->th_lock);
>> + *mode = pzone->mode;
>> + mutex_unlock(&pzone->th_lock);
>> +
>> + return 0;
>> +}
>> +
>> +/* Callback to set thermal zone mode */ static int
>> +db8500_sys_set_mode(struct thermal_zone_device *thermal,
>> + enum thermal_device_mode mode)
>> +{
>> + struct db8500_thermal_zone *pzone = thermal->devdata;
>> +
>> + mutex_lock(&pzone->th_lock);
>> +
>> + pzone->mode = mode;
>> + if (mode == THERMAL_DEVICE_ENABLED)
>> + schedule_work(&pzone->therm_work);
>> +
>> + mutex_unlock(&pzone->th_lock);
>> +
>> + return 0;
>> +}
>> +
>> +/* Callback to get trip point type */
>> +static int db8500_sys_get_trip_type(struct thermal_zone_device
>> *thermal,
>> + int trip, enum thermal_trip_type *type) {
>> + struct db8500_thermal_zone *pzone = thermal->devdata;
>> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab;
>> +
>> + if (trip >= ptrips->num_trips)
>> + return -EINVAL;
>> +
>> + *type = ptrips->trip_points[trip].type;
>> +
>> + return 0;
>> +}
>> +
>> +/* Callback to get trip point temperature */ static int
>> +db8500_sys_get_trip_temp(struct thermal_zone_device *thermal,
>> + int trip, unsigned long *temp)
>> +{
>> + struct db8500_thermal_zone *pzone = thermal->devdata;
>> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab;
>> +
>> + if (trip >= ptrips->num_trips)
>> + return -EINVAL;
>> +
>> + *temp = ptrips->trip_points[trip].temp;
>> +
>> + return 0;
>> +}
>> +
>> +/* Callback to get critical trip point temperature */ static int
>> +db8500_sys_get_crit_temp(struct thermal_zone_device *thermal,
>> + unsigned long *temp)
>> +{
>> + struct db8500_thermal_zone *pzone = thermal->devdata;
>> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab;
>> + int i;
>> +
>> + for (i = ptrips->num_trips - 1; i > 0; i--) {
>> + if (ptrips->trip_points[i].type == THERMAL_TRIP_CRITICAL) {
>> + *temp = ptrips->trip_points[i].temp;
>> + return 0;
>> + }
>> + }
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static struct thermal_zone_device_ops thdev_ops = {
>> + .bind = db8500_cdev_bind,
>> + .unbind = db8500_cdev_unbind,
>> + .get_temp = db8500_sys_get_temp,
>> + .get_trend = db8500_sys_get_trend,
>> + .get_mode = db8500_sys_get_mode,
>> + .set_mode = db8500_sys_set_mode,
>> + .get_trip_type = db8500_sys_get_trip_type,
>> + .get_trip_temp = db8500_sys_get_trip_temp,
>> + .get_crit_temp = db8500_sys_get_crit_temp, };
>> +
>> +static void db8500_thermal_update_config(struct db8500_thermal_zone
>> *pzone,
>> + unsigned int idx, enum thermal_trend trend,
>> + unsigned long next_low, unsigned long next_high) {
>> + pzone->cur_index = idx;
>> + pzone->cur_temp_pseudo = (next_low + next_high)/2;
>> + pzone->trend = trend;
>> +
>> + prcmu_stop_temp_sense();
>> + prcmu_config_hotmon((u8)(next_low/1000), (u8)(next_high/1000));
>> + prcmu_start_temp_sense(PRCMU_DEFAULT_MEASURE_TIME);
>> +}
>> +
>> +static irqreturn_t prcmu_low_irq_handler(int irq, void *irq_data) {
>> + struct db8500_thermal_zone *pzone = irq_data;
>> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab;
>> + unsigned int idx = pzone->cur_index;
>> + unsigned long next_low, next_high;
>> +
>> + if (unlikely(idx == 0))
>> + /* Meaningless for thermal management, ignoring it */
>> + return IRQ_HANDLED;
>> +
>> + if (idx == 1) {
>> + next_high = ptrips->trip_points[0].temp;
>> + next_low = PRCMU_DEFAULT_LOW_TEMP;
>> + } else {
>> + next_high = ptrips->trip_points[idx-1].temp;
>> + next_low = ptrips->trip_points[idx-2].temp;
>> + }
>> + idx -= 1;
>> +
>> + db8500_thermal_update_config(pzone, idx, THERMAL_TREND_DROPPING,
>> + next_low, next_high);
>> +
>> + dev_dbg(&pzone->therm_dev->device,
>> + "PRCMU set max %ld, min %ld\n", next_high, next_low);
>> +
>> + schedule_work(&pzone->therm_work);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static irqreturn_t prcmu_high_irq_handler(int irq, void *irq_data) {
>> + struct db8500_thermal_zone *pzone = irq_data;
>> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab;
>> + unsigned int idx = pzone->cur_index;
>> + unsigned long next_low, next_high;
>> +
>> + if (idx < ptrips->num_trips - 1) {
>> + next_high = ptrips->trip_points[idx+1].temp;
>> + next_low = ptrips->trip_points[idx].temp;
>> + idx += 1;
>> +
>> + db8500_thermal_update_config(pzone, idx,
>> THERMAL_TREND_RAISING,
>> + next_low, next_high);
>> +
>> + dev_dbg(&pzone->therm_dev->device,
>> + "PRCMU set max %ld, min %ld\n", next_high, next_low);
>> + } else if (idx == ptrips->num_trips - 1)
>> + pzone->cur_temp_pseudo = ptrips->trip_points[idx].temp + 1;
>> +
>> + schedule_work(&pzone->therm_work);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static void db8500_thermal_work(struct work_struct *work) {
>> + enum thermal_device_mode cur_mode;
>> + struct db8500_thermal_zone *pzone;
>> +
>> + pzone = container_of(work, struct db8500_thermal_zone,
>> therm_work);
>> +
>> + mutex_lock(&pzone->th_lock);
>> + cur_mode = pzone->mode;
>> + mutex_unlock(&pzone->th_lock);
>> +
>> + if (cur_mode == THERMAL_DEVICE_DISABLED)
>> + return;
>> +
>> + thermal_zone_device_update(pzone->therm_dev);
>> + dev_dbg(&pzone->therm_dev->device, "thermal work finished.\n"); }
>> +
>> +#ifdef CONFIG_OF
>> +static struct db8500_thsens_platform_data*
>> + db8500_thermal_parse_dt(struct platform_device *pdev) {
>> + struct db8500_thsens_platform_data *ptrips;
>> + struct device_node *np = pdev->dev.of_node;
>> + char prop_name[32];
>> + const char *tmp_str;
>> + u32 tmp_data;
>> + int i, j;
>> +
>> + ptrips = devm_kzalloc(&pdev->dev, sizeof(*ptrips), GFP_KERNEL);
>> + if (!ptrips)
>> + return NULL;
>> +
>> + if (of_property_read_u32(np, "num-trips", &tmp_data))
>> + goto err_parse_dt;
>> +
>> + if (tmp_data > THERMAL_MAX_TRIPS)
>> + goto err_parse_dt;
>> +
>> + ptrips->num_trips = tmp_data;
>> +
>> + for (i = 0; i < ptrips->num_trips; i++) {
>> + sprintf(prop_name, "trip%d-temp", i);
>> + if (of_property_read_u32(np, prop_name, &tmp_data))
>> + goto err_parse_dt;
>> +
>> + ptrips->trip_points[i].temp = tmp_data;
>> +
>> + sprintf(prop_name, "trip%d-type", i);
>> + if (of_property_read_string(np, prop_name, &tmp_str))
>> + goto err_parse_dt;
>> +
>> + if (!strcmp(tmp_str, "active"))
>> + ptrips->trip_points[i].type = THERMAL_TRIP_ACTIVE;
>> + else if (!strcmp(tmp_str, "passive"))
>> + ptrips->trip_points[i].type = THERMAL_TRIP_PASSIVE;
>> + else if (!strcmp(tmp_str, "hot"))
>> + ptrips->trip_points[i].type = THERMAL_TRIP_HOT;
>> + else if (!strcmp(tmp_str, "critical"))
>> + ptrips->trip_points[i].type = THERMAL_TRIP_CRITICAL;
>> + else
>> + goto err_parse_dt;
>> +
>> + sprintf(prop_name, "trip%d-cdev-num", i);
>> + if (of_property_read_u32(np, prop_name, &tmp_data))
>> + goto err_parse_dt;
>> +
>> + if (tmp_data > COOLING_DEV_MAX)
>> + goto err_parse_dt;
>> +
>> + for (j = 0; j < tmp_data; j++) {
>> + sprintf(prop_name, "trip%d-cdev-name%d", i, j);
>> + if (of_property_read_string(np, prop_name, &tmp_str))
>> + goto err_parse_dt;
>> +
>> + if (strlen(tmp_str) > THERMAL_NAME_LENGTH)
>> + goto err_parse_dt;
>> +
>> + strcpy(ptrips->trip_points[i].cdev_name[j], tmp_str);
>> + }
>> + }
>> + return ptrips;
>> +
>> +err_parse_dt:
>> + dev_err(&pdev->dev, "Parsing device tree data error.\n");
>> + return NULL;
>> +}
>> +#else
>> +static inline struct db8500_thsens_platform_data*
>> + db8500_thermal_parse_dt(struct platform_device *pdev) {
>> + return NULL;
>> +}
>> +#endif
>> +
>> +static int db8500_thermal_probe(struct platform_device *pdev) {
>> + struct db8500_thermal_zone *pzone = NULL;
>> + struct db8500_thsens_platform_data *ptrips = NULL;
>> + struct device_node *np = pdev->dev.of_node;
>> + int low_irq, high_irq, ret = 0;
>> + unsigned long dft_low, dft_high;
>> +
>> + if (np)
>> + ptrips = db8500_thermal_parse_dt(pdev);
>> + else
>> + ptrips = dev_get_platdata(&pdev->dev);
>> +
>> + if (!ptrips)
>> + return -EINVAL;
>> +
>> + pzone = devm_kzalloc(&pdev->dev, sizeof(*pzone), GFP_KERNEL);
>> + if (!pzone)
>> + return -ENOMEM;
>> +
>> + mutex_init(&pzone->th_lock);
>> + mutex_lock(&pzone->th_lock);
>> +
>> + pzone->mode = THERMAL_DEVICE_DISABLED;
>> + pzone->trip_tab = ptrips;
>> +
>> + dft_low = PRCMU_DEFAULT_LOW_TEMP;
>> + dft_high = ptrips->trip_points[0].temp;
>> +
>> + db8500_thermal_update_config(pzone, 0, THERMAL_TREND_STABLE,
>> + dft_low, dft_high);
>> +
>> + INIT_WORK(&pzone->therm_work, db8500_thermal_work);
>> +
>> + low_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_LOW");
>> + if (low_irq < 0) {
>> + dev_err(&pdev->dev, "Get IRQ_HOTMON_LOW failed.\n");
>> + return low_irq;
>> + }
>> +
>> + ret = devm_request_threaded_irq(&pdev->dev, low_irq, NULL,
>> + prcmu_low_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT,
>> + "dbx500_temp_low", pzone);
>> + if (ret < 0) {
>> + dev_err(&pdev->dev, "Failed to allocate temp low irq.\n");
>> + return ret;
>> + }
>> +
>> + high_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_HIGH");
>> + if (high_irq < 0) {
>> + dev_err(&pdev->dev, "Get IRQ_HOTMON_HIGH failed.\n");
>> + return high_irq;
>> + }
>> +
>> + ret = devm_request_threaded_irq(&pdev->dev, high_irq, NULL,
>> + prcmu_high_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT,
>> + "dbx500_temp_high", pzone);
>> + if (ret < 0) {
>> + dev_err(&pdev->dev, "Failed to allocate temp high irq.\n");
>> + return ret;
>> + }
>> +
>> + pzone->therm_dev =
>> thermal_zone_device_register("db8500_thermal_zone",
>> + ptrips->num_trips, 0, pzone, &thdev_ops, 0, 0);
>> +
>> + if (IS_ERR_OR_NULL(pzone->therm_dev)) {
>> + dev_err(&pdev->dev, "Register thermal zone device
>> failed.\n");
>> + return PTR_ERR(pzone->therm_dev);
>> + }
>> + dev_info(&pdev->dev, "Thermal zone device registered.\n");
>> +
>> + platform_set_drvdata(pdev, pzone);
>> + pzone->mode = THERMAL_DEVICE_ENABLED;
>> + mutex_unlock(&pzone->th_lock);
>> +
>> + return 0;
>> +}
>> +
>> +static int db8500_thermal_remove(struct platform_device *pdev) {
>> + struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev);
>> +
>> + thermal_zone_device_unregister(pzone->therm_dev);
>> + cancel_work_sync(&pzone->therm_work);
>> + mutex_destroy(&pzone->th_lock);
>> +
>> + return 0;
>> +}
>> +
>> +static int db8500_thermal_suspend(struct platform_device *pdev,
>> + pm_message_t state)
>> +{
>> + struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev);
>> +
>> + flush_work_sync(&pzone->therm_work);
>> + prcmu_stop_temp_sense();
>> +
>> + return 0;
>> +}
>> +
>> +static int db8500_thermal_resume(struct platform_device *pdev) {
>> + struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev);
>> + struct db8500_thsens_platform_data *ptrips = pzone->trip_tab;
>> + unsigned long dft_low, dft_high;
>> +
>> + dft_low = PRCMU_DEFAULT_LOW_TEMP;
>> + dft_high = ptrips->trip_points[0].temp;
>> +
>> + db8500_thermal_update_config(pzone, 0, THERMAL_TREND_STABLE,
>> + dft_low, dft_high);
>> +
>> + return 0;
>> +}
>> +
>> +#ifdef CONFIG_OF
>> +static const struct of_device_id db8500_thermal_match[] = {
>> + { .compatible = "stericsson,db8500-thermal" },
>> + {},
>> +};
>> +#else
>> +#define db8500_thermal_match NULL
>> +#endif
>> +
>> +static struct platform_driver db8500_thermal_driver = {
>> + .driver = {
>> + .owner = THIS_MODULE,
>> + .name = "db8500-thermal",
>> + .of_match_table = db8500_thermal_match,
>> + },
>> + .probe = db8500_thermal_probe,
>> + .suspend = db8500_thermal_suspend,
>> + .resume = db8500_thermal_resume,
>> + .remove = db8500_thermal_remove,
>> +};
>> +
>> +module_platform_driver(db8500_thermal_driver);
>> +
>> +MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@stericsson.com>");
>> +MODULE_DESCRIPTION("DB8500 thermal driver"); MODULE_LICENSE("GPL");
>> diff --git a/include/linux/platform_data/db8500_thermal.h
>> b/include/linux/platform_data/db8500_thermal.h
>> new file mode 100644
>> index 0000000..3bf6090
>> --- /dev/null
>> +++ b/include/linux/platform_data/db8500_thermal.h
>> @@ -0,0 +1,38 @@
>> +/*
>> + * db8500_thermal.h - DB8500 Thermal Management Implementation
>> + *
>> + * Copyright (C) 2012 ST-Ericsson
>> + * Copyright (C) 2012 Linaro Ltd.
>> + *
>> + * Author: Hongbo Zhang <hongbo.zhang@linaro.com>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> modify
>> + * it under the terms of the GNU General Public License as published
>> by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#ifndef _DB8500_THERMAL_H_
>> +#define _DB8500_THERMAL_H_
>> +
>> +#include <linux/thermal.h>
>> +
>> +#define COOLING_DEV_MAX 8
>> +
>> +struct db8500_trip_point {
>> + unsigned long temp;
>> + enum thermal_trip_type type;
>> + char cdev_name[COOLING_DEV_MAX][THERMAL_NAME_LENGTH];
>> +};
>> +
>> +struct db8500_thsens_platform_data {
>> + struct db8500_trip_point trip_points[THERMAL_MAX_TRIPS];
>> + int num_trips;
>> +};
>> +
>> +#endif /* _DB8500_THERMAL_H_ */
>> --
>> 1.7.11.3



\
 
 \ /
  Last update: 2012-11-06 12:02    [W:0.321 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site