lkml.org 
[lkml]   [2012]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] ARM: eukrea_mbimx27-baseboard - use stock get_pendown_state() in ads7846
The default implementation matches exactly our custom one so we can switch
to using the default one. As a bonus the driver will take care of setting
GPIO line for us.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---

Not tested - no hardware, but should be fine.

arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 19 +------------------
1 file changed, 1 insertion(+), 18 deletions(-)

diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index 98aef57..b20fc55 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -238,24 +238,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};

-#define ADS7846_PENDOWN (GPIO_PORTD | 25)
-
-static void __maybe_unused ads7846_dev_init(void)
-{
- if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
- printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
- return;
- }
- gpio_direction_input(ADS7846_PENDOWN);
-}
-
-static int ads7846_get_pendown_state(void)
-{
- return !gpio_get_value(ADS7846_PENDOWN);
-}
-
static struct ads7846_platform_data ads7846_config __initdata = {
- .get_pendown_state = ads7846_get_pendown_state,
+ .gpio_pendown = (GPIO_PORTD | 25),
.keep_vref_on = 1,
};

@@ -323,7 +307,6 @@ void __init eukrea_mbimx27_baseboard_init(void)
|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
/* ADS7846 Touchscreen controller init */
mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
- ads7846_dev_init();
#endif

/* SPI_CS0 init */
--
1.7.11.7

--
Dmitry


\
 
 \ /
  Last update: 2012-11-24 10:01    [W:0.139 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site