Messages in this thread Patch in this message | | | From | Jonghwan Choi <> | Subject | [PATCH v3 2/2] therma: exynos: Supports thermal tripping | Date | Tue, 20 Nov 2012 09:57:35 +0900 |
| |
TMU urgently sends active-high signal (thermal trip) to PMU, and thermal tripping by hardware logic i.e PMU is performed. Thermal tripping means that PMU cut off the whole power of SoC by controlling external voltage regulator.
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> --- drivers/thermal/exynos_thermal.c | 10 ++++++++++ 1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c index 129e827..569478d 100644 --- a/drivers/thermal/exynos_thermal.c +++ b/drivers/thermal/exynos_thermal.c @@ -58,6 +58,7 @@ #define EXYNOS_TMU_CORE_ON BIT(0) #define EXYNOS_TMU_CORE_ON_SHIFT 0 #define EXYNOS_TMU_CORE_ON_MASK (0x1 << EXYNOS_TMU_CORE_ON_SHIFT) +#define EXYNOS_TMU_TRIP_EN BIT(12) #define EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET 50
/* Exynos4210 specific registers */ @@ -631,6 +632,12 @@ static int exynos_tmu_initialize(struct platform_device *pdev) goto out; } rising_threshold |= (threshold_code << 16); + threshold_code = temp_to_code(data, pdata->trigger_levels[3]); + if (threshold_code < 0) { + ret = threshold_code; + goto out; + } + rising_threshold |= (threshold_code << 24);
writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE); @@ -665,6 +672,8 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) con &= ~(EXYNOS_TMU_TRIP_MODE_MASK | EXYNOS_MUX_ADDR_MASK); con |= pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT; con |= (EXYNOS_MUX_ADDR_VALUE << EXYNOS_MUX_ADDR_SHIFT); + if (pdata->trigger_levels[3]) + con |= EXYNOS_TMU_TRIP_EN; }
if (on) { @@ -770,6 +779,7 @@ static struct exynos_tmu_platform_data const exynos_default_tmu_data = { .trigger_levels[0] = 85, .trigger_levels[1] = 103, .trigger_levels[2] = 110, + .trigger_levels[3] = 120, .trigger_level0_en = 1, .trigger_level1_en = 1, .trigger_level2_en = 1, -- 1.7.4.1
| |