lkml.org 
[lkml]   [2012]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V4 0/4] ARM: tegra: Enable SLINK controller driver
Date
This series modify the dts file to add the slink addresses,
make AUXDATA in board dt files, enable slink4 for tegra30-cardhu and
enable slink controller defconfig.

Changes from V1:
- Remove changes from clock tables.
- Make the dma req dt property name to nvidia,dma-request-selector.
- change the spi max frequency prop to spi-max-frequency.

Changes from V2:
- make node name to spi.
- get rid of iomap.h.

Changes from V3:
- Enable spi flash connected on slink4-cs1.
- Enable require defconfigs.

Laxman Dewangan (4):
ARM: tegra: dts: add slink controller dt entry
ARM: tegra: Add OF_DEV_AUXDATA for SLINK driver in board dt
ARM: tegra: dts: cardhu: enable SLINK4
ARM: tegra: config: enable spi driver for Tegra SLINK controller

.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/tegra20.dtsi | 41 +++++++++++++
arch/arm/boot/dts/tegra30-cardhu.dtsi | 10 +++
arch/arm/boot/dts/tegra30.dtsi | 60 ++++++++++++++++++++
arch/arm/configs/tegra_defconfig | 5 +-
arch/arm/mach-tegra/board-dt-tegra20.c | 8 +++
arch/arm/mach-tegra/board-dt-tegra30.c | 12 ++++
7 files changed, 136 insertions(+), 1 deletions(-)



\
 
 \ /
  Last update: 2012-10-31 11:21    [W:0.077 / U:2.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site