lkml.org 
[lkml]   [2012]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 13/25] USB: ohci: allow platform driver to specify the number of ports
Date
Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
drivers/usb/host/ohci-platform.c | 4 ++++
include/linux/usb/ohci_pdriver.h | 2 ++
2 files changed, 6 insertions(+)

diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index e24ec9f..1caaf65 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -31,6 +31,10 @@ static int ohci_platform_reset(struct usb_hcd *hcd)
ohci->flags |= OHCI_QUIRK_FRAME_NO;

ohci_hcd_init(ohci);
+
+ if (pdata->num_ports)
+ ohci->num_ports = pdata->num_ports;
+
err = ohci_init(ohci);

return err;
diff --git a/include/linux/usb/ohci_pdriver.h b/include/linux/usb/ohci_pdriver.h
index 74e7755..012f2b7 100644
--- a/include/linux/usb/ohci_pdriver.h
+++ b/include/linux/usb/ohci_pdriver.h
@@ -25,6 +25,7 @@
* @big_endian_desc: BE descriptors
* @big_endian_mmio: BE registers
* @no_big_frame_no: no big endian frame_no shift
+ * @num_ports: number of ports
*
* These are general configuration options for the OHCI controller. All of
* these options are activating more or less workarounds for some hardware.
@@ -33,6 +34,7 @@ struct usb_ohci_pdata {
unsigned big_endian_desc:1;
unsigned big_endian_mmio:1;
unsigned no_big_frame_no:1;
+ unsigned int num_ports;

/* Turn on all power and clocks */
int (*power_on)(struct platform_device *pdev);
--
1.7.9.5


\
 
 \ /
  Last update: 2012-10-03 17:41    [W:0.021 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site