lkml.org 
[lkml]   [2012]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH tty-next] x86: ce4100: allow second UART usage
Date
From: Maxime Bizon <mbizon@freebox.fr>

The current CE4100 and 8250_pci code have both a limitation preventing the
registration and usage of CE4100's second UART. This patch changes the
platform code fixing up the UART port to work on a relative UART port
base address, as well as the 8250_pci code to make it register 2 UART ports
for CE4100 and pass the port index down to all consumers.

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
---
arch/x86/platform/ce4100/ce4100.c | 3 +++
drivers/tty/serial/8250/8250_pci.c | 6 +++---
2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c
index 4c61b52..0dcc30e 100644
--- a/arch/x86/platform/ce4100/ce4100.c
+++ b/arch/x86/platform/ce4100/ce4100.c
@@ -92,8 +92,11 @@ static void ce4100_serial_fixup(int port, struct uart_port *up,
up->membase =
(void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
up->membase += up->mapbase & ~PAGE_MASK;
+ up->mapbase += port * 0x100;
+ up->membase += port * 0x100;
up->iotype = UPIO_MEM32;
up->regshift = 2;
+ up->irq = 4;
}
#endif
up->iobase = 0;
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 17b7d26..cec8852 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1068,7 +1068,7 @@ ce4100_serial_setup(struct serial_private *priv,
{
int ret;

- ret = setup_port(priv, port, 0, 0, board->reg_shift);
+ ret = setup_port(priv, port, idx, 0, board->reg_shift);
port->port.iotype = UPIO_MEM32;
port->port.type = PORT_XSCALE;
port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
@@ -2658,8 +2658,8 @@ static struct pciserial_board pci_boards[] __devinitdata = {
.first_offset = 0x1000,
},
[pbn_ce4100_1_115200] = {
- .flags = FL_BASE0,
- .num_ports = 1,
+ .flags = FL_BASE_BARS,
+ .num_ports = 2,
.base_baud = 921600,
.reg_shift = 2,
},
--
1.7.9.5


\
 
 \ /
  Last update: 2012-10-19 11:21    [W:0.033 / U:1.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site