lkml.org 
[lkml]   [2012]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: DEBUG_STACKOVERFLOW issue on ARM
On Thu, Oct 11, 2012 at 01:09:46PM +0530, vaibhav shinde wrote:
> Hi Russel,
>
> On Fri, Oct 5, 2012 at 2:01 PM, Russell King - ARM Linux
> <linux@arm.linux.org.uk> wrote:
> >
> > On Wed, Oct 03, 2012 at 05:18:56PM +0530, trisha yad wrote:
> > > I wish to know how can I support this function in 3.0 ?
> >
> > If your description is correct, then all you need to do is to ensure
> > that you route interrupts to other CPUs.
> >
> > You can do that by running the userspace irqbalance daemon.
> >
>
> I also tried with the irqbalance daemon, on ARM quad core architecture,
> and as per my understanding, the daemon sets the
> /proc/irq/<irq.no.>/smp_affinity
> file according to the irq frequency on a particular processor.
>
> However, the daemon doesn't work as expected, I also tried
> accessing the
> proc file mentioned above to set the cpu mask for particular irq, but this
> just block the processing of the irq, as I see the count of that irq
> doesnt increase
> in /proc/interrupts.
>
> My conclusion is that the irqbalancing is not supported on
> ARM arch or there is
> something more required for this to work. Kindly provide some
> pointers over this.

Sounds like something has been broken, no idea what. It needs investigation.


\
 
 \ /
  Last update: 2012-10-11 10:21    [W:0.076 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site