Messages in this thread | | | From | "Tomoya MORINAGA" <> | Subject | About bittiming calculation result | Date | Mon, 7 Feb 2011 20:38:29 +0900 |
| |
Hi,
I have a question for bittiming-value calculated by Can-core.
In case setting like below, - ip link set can0 type can bitrate 800000 - clock=50MHz - Use pch_can
Can-core calculates like below brp=21 seg1=1 seg2=1 sjw=1 prop_seg=0
Is "prop_seg=0" true ? seg1/seg2/sjw/prop_seg must be more than 1 ?
Also I can see the following kernel error log. bitrate error 0.7%
Thanks, ----------------------------------------- Tomoya MORINAGA OKI SEMICONDUCTOR CO., LTD.
| |