lkml.org 
[lkml]   [2011]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 1/1 V2] x86, apic: Make "broken BIOS!!" messages unique
x86, apic: Make "broken BIOS!!" messages unique

There are five identical "broken BIOS!!" messages. This patch makes each
message unique so that it is easier to determine which message was actually
printed. Changed to "broken MPBIOS: <unique identifier>!!"

The 'inconceivable' messages are because it should not be possible to reach
those code paths.

V2: Change to specify MPBIOS and remove exclamation marks.

Signed-off-by: John L. Villalovos <john.l.villalovos@intel.com>

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 697dc34..5391276 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -841,7 +841,7 @@ static int MPBIOS_polarity(int idx)
}
case 2: /* reserved */
{
- printk(KERN_WARNING "broken BIOS!!\n");
+ printk(KERN_WARNING "broken MPBIOS: polarity\n");
polarity = 1;
break;
}
@@ -852,7 +852,7 @@ static int MPBIOS_polarity(int idx)
}
default: /* invalid */
{
- printk(KERN_WARNING "broken BIOS!!\n");
+ printk(KERN_WARNING "broken MPBIOS: inconceivable polarity\n");
polarity = 1;
break;
}
@@ -899,7 +899,7 @@ static int MPBIOS_trigger(int idx)
}
default:
{
- printk(KERN_WARNING "broken BIOS!!\n");
+ printk(KERN_WARNING "broken MPBIOS: unknown bus type\n");
trigger = 1;
break;
}
@@ -913,7 +913,7 @@ static int MPBIOS_trigger(int idx)
}
case 2: /* reserved */
{
- printk(KERN_WARNING "broken BIOS!!\n");
+ printk(KERN_WARNING "broken MPBIOS: trigger\n");
trigger = 1;
break;
}
@@ -924,7 +924,7 @@ static int MPBIOS_trigger(int idx)
}
default: /* invalid */
{
- printk(KERN_WARNING "broken BIOS!!\n");
+ printk(KERN_WARNING "broken MPBIOS: inconceivable trigger\n");
trigger = 0;
break;
}

\
 
 \ /
  Last update: 2011-02-07 16:31    [W:0.081 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site