lkml.org 
[lkml]   [2011]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH repost 4/4] avr32: at32ap700x: specify DMA src and dst masters
On Mon, Feb 21, 2011 at 02:45:00PM +0100, Hans-Christian Egtvedt wrote:
> On Fri, 2011-01-21 at 14:11 +0000, Jamie Iles wrote:
> > Now that the dw_dmac DMA driver supports configurable source and
> > destination masters we need to specify which ones to use. This was
> > previously hardcoded to 0 and 1 respectively in the driver.
> >
> > Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
> > Cc: Dan Williams <dan.j.williams@intel.com>
> > Signed-off-by: Jamie Iles <jamie@jamieiles.com>
> > ---
> > arch/avr32/mach-at32ap/at32ap700x.c | 6 ++++++
> > 1 files changed, 6 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
> > index e67c999..2747cde 100644
> > --- a/arch/avr32/mach-at32ap/at32ap700x.c
> > +++ b/arch/avr32/mach-at32ap/at32ap700x.c
> > @@ -2048,6 +2048,8 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data,
> > rx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT;
> > rx_dws->cfg_hi = DWC_CFGH_SRC_PER(3);
> > rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
> > + rx_dws->src_master = 0;
> > + rx_dws->dst_master = 1;
> > }
> >
> > /* Check if DMA slave interface for playback should be configured. */
> > @@ -2056,6 +2058,8 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data,
> > tx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT;
> > tx_dws->cfg_hi = DWC_CFGH_DST_PER(4);
> > tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
> > + rx_dws->src_master = 0;
> > + rx_dws->dst_master = 1;
>
> Spotted by Nicolas Ferre, you use the wrong struct here, should be
> tx_dws, not rx_dws.

Apologies, here's a patch to fix it up.

Jamie

8<--------

From 9068d500450ad6f5189b9a71463851349700c505 Mon Sep 17 00:00:00 2001
From: Jamie Iles <jamie@jamieiles.com>
Date: Mon, 21 Feb 2011 14:38:32 +0000
Subject: [PATCH] avr32: at32ap700x: fix typo in DMA master configuration

Commit 4aa5f366431fe (avr32: at32ap700x: specify DMA src and dst
masters) specified the masters for the ac97c playback device
but incorrectly set them in the capture slave information rather
than playback.

Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
---
arch/avr32/mach-at32ap/at32ap700x.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 2747cde..4635c7c 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -2058,8 +2058,8 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data,
tx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT;
tx_dws->cfg_hi = DWC_CFGH_DST_PER(4);
tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
- rx_dws->src_master = 0;
- rx_dws->dst_master = 1;
+ tx_dws->src_master = 0;
+ tx_dws->dst_master = 1;
}

if (platform_device_add_data(pdev, data,
--
1.7.4


\
 
 \ /
  Last update: 2011-02-21 15:49    [W:0.107 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site