lkml.org 
[lkml]   [2011]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 10/17] powerpc/e500: Fix up the last references to CONFIG_PPC_E500MC
Date
This moves the "select PPC_FPU" from PPC_E500MC to the new FSL_E500MC
processor selection, where it belongs.

The only actual difference that this patch introduces is the P5020DS
board (FreeScale e5500 CPU) will not set FSL_E500MC when building in
64-bit mode.

This is OK as all of the existing code that the 64-bit P5020DS needs is
still conditional on CONFIG_E500 or CONFIG_PPC_FPU, which are both set
properly on the P5020DS (PPC_FPU is always enabled on 64-bit).

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
---
arch/powerpc/include/asm/cache.h | 2 +-
arch/powerpc/platforms/85xx/Kconfig | 10 +++++-----
arch/powerpc/platforms/Kconfig.cputype | 8 ++------
3 files changed, 8 insertions(+), 12 deletions(-)

diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 4b50941..10988a2 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -8,7 +8,7 @@
#if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
#define L1_CACHE_SHIFT 4
#define MAX_COPY_PREFETCH 1
-#elif defined(CONFIG_PPC_E500MC)
+#elif defined(CONFIG_FSL_E500MC)
#define L1_CACHE_SHIFT 6
#define MAX_COPY_PREFETCH 4
#elif defined(CONFIG_PPC32)
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 37f9de7..248f87c 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -173,8 +173,8 @@ config SBC8560

config P2041_RDB
bool "Freescale P2041 RDB"
+ depends on FSL_E500MC
select DEFAULT_UIMAGE
- select PPC_E500MC
select PHYS_64BIT_DT_REQUIRED
select SWIOTLB
select ARCH_REQUIRE_GPIOLIB
@@ -187,8 +187,8 @@ config P2041_RDB

config P3041_DS
bool "Freescale P3041 DS"
+ depends on FSL_E500MC
select DEFAULT_UIMAGE
- select PPC_E500MC
select PHYS_64BIT_DT_REQUIRED
select SWIOTLB
select ARCH_REQUIRE_GPIOLIB
@@ -201,8 +201,8 @@ config P3041_DS

config P3060_QDS
bool "Freescale P3060 QDS"
+ depends on FSL_E500MC
select DEFAULT_UIMAGE
- select PPC_E500MC
select PHYS_64BIT_DT_REQUIRED
select SWIOTLB
select MPC8xxx_GPIO
@@ -214,8 +214,8 @@ config P3060_QDS

config P4080_DS
bool "Freescale P4080 DS"
+ depends on FSL_E500MC
select DEFAULT_UIMAGE
- select PPC_E500MC
select PHYS_64BIT_DT_REQUIRED
select SWIOTLB
select ARCH_REQUIRE_GPIOLIB
@@ -230,9 +230,9 @@ endif # PPC32

config P5020_DS
bool "Freescale P5020 DS"
+ depends on FSL_E500MC || PPC_BOOK3E_64
select DEFAULT_UIMAGE
select E500
- select PPC_E500MC
select PHYS_64BIT_DT_REQUIRED
select SWIOTLB
select ARCH_REQUIRE_GPIOLIB
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 9770564..fd37bb2 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -38,6 +38,7 @@ config FSL_E500_V1_V2
config FSL_E500MC
bool "Freescale e500mc (also e5500 in 32-bit mode)"
select PHYS_64BIT_SUPPORTED
+ select PPC_FPU
select E500
select PPC_85xx

@@ -148,11 +149,6 @@ config E500
select PPC_FSL_BOOK3E
bool

-config PPC_E500MC
- bool "e500mc Support"
- select PPC_FPU
- depends on E500
-
config PPC_FPU
bool
default y if PPC64
@@ -280,7 +276,7 @@ config PPC_ICSWX

config SPE
bool "SPE Support"
- depends on FSL_E200 || (E500 && !PPC_E500MC)
+ depends on FSL_E200 || FSL_E500_V1_V2
default y
---help---
This option enables kernel support for the Signal Processing
--
1.7.2.5


\
 
 \ /
  Last update: 2011-11-10 01:13    [W:0.028 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site