Messages in this thread | | | Date | Tue, 22 Nov 2011 10:36:28 +0100 | From | Stefan Priebe - Profihost AG <> | Subject | Re: Kernel v3.0.8 igb driver dies when pulling network cable |
| |
> It would be useful if you could try the latest driver from e1000.sf.net > just to verify if this is a bug in the upstream kernel or if it is also > present in our e1000.sf.net.driver. This way we can figure out if this > is an issue where a patch wasn't pushed into the stable kernel or if it > is an issue that still exists in our latest release. > > Also could you provide us with the part number you are currently using. > If you could provide us with the device ID for the part via lspci we can > start narrowing down the root cause for the issue as currently we don't > have any information about what hardware you are experiencing this issue on.
Ok another note i missed last time. Ethernet and Server stays fully functional - it just prints the message and resets the adapter.
OK let's start with lspci: a:00.0 Ethernet controller: Intel Corporation Device 10c9 (rev 01) Subsystem: Super Micro Computer Inc Device 10c9 Flags: bus master, fast devsel, latency 0, IRQ 28 Memory at fbe60000 (32-bit, non-prefetchable) [size=128K] Memory at fbe40000 (32-bit, non-prefetchable) [size=128K] I/O ports at e880 [size=32] Memory at fbe1c000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at fbe20000 [disabled] [size=128K] Capabilities: [40] Power Management version 3 Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- Capabilities: [70] MSI-X: Enable+ Mask- TabSize=10 Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [140] Device Serial Number ce-5a-2b-ff-ff-90-25-00 Capabilities: [150] #0e Capabilities: [160] #10 Kernel driver in use: igb
0a:00.1 Ethernet controller: Intel Corporation Device 10c9 (rev 01) Subsystem: Super Micro Computer Inc Device 10c9 Flags: bus master, fast devsel, latency 0, IRQ 40 Memory at fbee0000 (32-bit, non-prefetchable) [size=128K] Memory at fbec0000 (32-bit, non-prefetchable) [size=128K] I/O ports at ec00 [size=32] Memory at fbe9c000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at fbea0000 [disabled] [size=128K] Capabilities: [40] Power Management version 3 Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- Capabilities: [70] MSI-X: Enable+ Mask- TabSize=10 Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [140] Device Serial Number ce-5a-2b-ff-ff-90-25-00 Capabilities: [150] #0e Capabilities: [160] #10 Kernel driver in use: igb
Using the latest stable igb driver from e1000.sf.net works fine without any message.
Thanks,
Stefan
| |